Jump to content
SAU Community

Recommended Posts

ever since i got HKS wastegate actuators installed at the end of last year, there seem to be a boost spike (i think it is...)

no matter what boost stage i set it at (using power fc commander via boost controller option with power fc) the boost goes all the way up to 1.35bar+ and gets this MASSIVE B_A_N_G!!!!! and the car jerks forward (engine sounds like i am missing gear.. if u know what i mean.. but i am on the same gear for example if i am accelerating full on hard on 1st gear , i would hit max boost (1.2bar that i set it at ) around 4500-5000rpm and it just keeps going up and when it hits about 1.33-1.35 bar around 5500-6000rpm B-A-N-G !!

r the springs in the actuators too tight? too much tension? i believe they r adjustable so i can loosen the springs and make the actuator to actually HOLD the boost at maximum boost i set it at and keep it like that till red line?

and also another thing, no matter how low i set the boost , the minimum it will go is 1.1bar... and i really want low setting (like 0.9 bar or 1bar) for daily driving...

any suggestions??

thank you guys/girls... :D

Link to comment
https://www.sau.com.au/forums/topic/16998-hks-wastegate-actuator/
Share on other sites

Thanks nissaner,

I gave him a call and he said around $180. Did you end up fixing your problem?

I want to get a 14 psi actuator to alleviate some of the spike I am getting with my bleeder valve. Am I right in thinking an actuator will hep?

nissaner, I was under the impression that the HKS wastegate actuators have spring rates that are set - in your case, it sounds like you might be experienceing a bit of boost creep - what sort of turbo are you running - if it is a highflow, did they make the wastegate larger? I dont know about bang noises, could it be compressor surge?

Sorry if this isnt much help.

i didn't get the problem fixed yet coz josh (mech) is out of nsw for the weekend for his pit crew job... :P

i am only using stock / not high flowed... will take out the actuator next week and see what the problem is... (regarding to that BANG !! its not the noise it makes but its more of jerking/shaking of the car... imaginable or am i too crap at explaining? :P )

will post up the result next wk..

Hmm, well I dont know why you would be getting boost creep on stock trubos - perhaps the wastegate has been plumbed up to the boost solenoid wrong? or you have vacuum leak in pipes between solenoid and actuator?

Jurking/shaking could be turbos reaching surge limit - but I dont know what that is for the stock turbos turbos. If it is surge limit, you would hear it too, as the reversion through the compressor is usually noisy. Hopefully your mech can sort things out. Just have to keep your foot away from the carpet for a while :P

Sorry not much help again

Somewhere in the settings you should be able to set a rev limit and a boost cut. I'm not familiar with the Power FC but someone on this forum will know

On my EMC Duelsport I have set the soft rev limit at 7500and the hard limit at 7650 the boost cut I set to 1.35 bar 'cos my stock injectors were maxing out at 1.25 bar.

Nissaner,

In the Settings menu go to boost and there will be 4 settings and solonoid duty cycle. The boost you set (ie 1.2bar) is where the PFC sets the boost cut. You then use the duty cycle to bring the boost level up to what you want. So if you have the PFC set at 1.35bar, and the duty cycle brings boost up to 1.35bar then you will encounter boost cut...

See attachments...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...