Jump to content
SAU Community

C210 Injectors

L24_skyline
 Share

Recommended Posts

L24_skyline Contributor

L24_skyline

Posted
Posted

hey guys just wondering if u could help me out, i need to know wat kind of injectors i can put in my l24 efi???..... also i wanted to know if i put a manual gear box in my auto will i need to change the tailshaft and diff??..Ansd i also have a set of 240k taillights with the metal surrounding painted blu/green and wanted to know how much i should seel them for?

THANK YOU.

Link to comment
https://www.sau.com.au/forums/topic/170368-c210-injectors/
Share on other sites
GTR30 Community Regular

GTR30

Posted
Posted
hey guys just wondering if u could help me out, i need to know wat kind of injectors i can put in my l24 efi???..... also i wanted to know if i put a manual gear box in my auto will i need to change the tailshaft and diff??..Ansd i also have a set of 240k taillights with the metal surrounding painted blu/green and wanted to know how much i should seel them for?

THANK YOU.

might be an idea to PM Mag86 as he is working on a L24 project at the moment and is sussing out injectors and the like...

Link to comment
https://www.sau.com.au/forums/topic/170368-c210-injectors/#findComment-3146423
Share on other sites
coupe72001 Mentor

coupe72001

Posted
Posted

I did the auto to manual swap on my C210 some time ago. There's an old post here somewhere. Alfadog did a really detailled post too.

You definately do not need to change the tailshaft or diff. You need: the clutch, flywheel, gearbox, master cylinder, slave cylinder, lines, clutch pedal and spring, bolts for the flywheel, bolts for the master cylinder and bolts for the slave cylinder. It doesnt matter if you use a box from a C210, c211, 240k or 240/260Z, they are all the same length.

Good luck with it!

D

Link to comment
https://www.sau.com.au/forums/topic/170368-c210-injectors/#findComment-3149665
Share on other sites
L24_skyline Contributor

L24_skyline

Posted
  • Author
Posted

Thanks guys. i also have 240k tailights in good condition ive painted them a bluey/green, i also have all thparts for a manual convertion as i have a spaer parts car, ive boiught a new clutch already(exedy) and buyin the master cylinr in a couple of days, o do u think i coud make my car drft weapon?????

Link to comment
https://www.sau.com.au/forums/topic/170368-c210-injectors/#findComment-3154706
Share on other sites
Factory 5 Mentor

Factory 5

Posted
Posted
Thanks guys. i also have 240k tailights in good condition ive painted them a bluey/green, i also have all thparts for a manual convertion as i have a spaer parts car, ive boiught a new clutch already(exedy) and buyin the master cylinr in a couple of days, o do u think i coud make my car drft weapon?????

stiffer suspension is what you will be looking for, with some adjustable parts the get camber/castor etc.

L28 intake manifold and bigger injectors

Higher compression head (shaved N42 or bolt on N47)

Ka24e Throttle body (big mutha fekka)

2.5 inch exhaust, maybe 2.25

some weight reduction (remove spare wheel, seats, shit in boot)

new handbrak cable(get done by a pro)then re-tighten once worn in,(you WILL be useing this one a fair bit!

then find a BIG open remote location and practise on shitty tyres, cos you the rubber fryer yo!

oh ant whatch out for the VTEC, might kick in at ANY time!

Link to comment
https://www.sau.com.au/forums/topic/170368-c210-injectors/#findComment-3154796
Share on other sites
  • 1 month later...
  • 3 months later...
OUTATIME Community Regular

OUTATIME

Posted
Posted (edited)

rb30 and l24 do not run the same injectors. look the same yes (hose tail) but l28e injectors r 188cc and rb30's r 204cc by memory. and l28 injectors r bigger then l24 injectors.

mate with his l24et is running rb30 injectors and vl fuel pump. 10psi bout 120rwkw. no leaning out issues anymore...

Edited by OUTATIME
Link to comment
https://www.sau.com.au/forums/topic/170368-c210-injectors/#findComment-3420291
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...