Jump to content
SAU Community

Recommended Posts

Had the car tuned at CV Performance on Saturday morning...

The car has been tuned to run on 10psi boost where it made 189.6rwkw!!!

(alot better than the 114rwkw effort at AUTOSALON)

Then wound the boost up to 13psi and hit 203.4rwkw!!!

I now need to get a custom dump pipe and a high flow cat - CAN ANYONE HELP???

Next step is to see what sort of time i can make at WSID

*Will post up pick of print out soon*

Link to comment
https://www.sau.com.au/forums/topic/171238-finally-tuned/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Basti,

Lol, the 114rwkw at AUTOSALON was coz i had massive big range fuel cut and i was miss firing bad...

But, mods include...

- 3" exhaust w/ 6" cannon 4" tip

- Front mount intercooler 300x600x76mm - JustJap

- Cold air intake

- Pod Filter

- SSQ BOV

- NGK race spark plugs - instead of having a pin for spark, they have a big flat area! gapped to 0.7mm

- GFB manual boost contoller

- Apexi SAFC forgot that one!!! whoops!!!

- Shell V-power Racing!

Thats all performance wise....

Link to comment
https://www.sau.com.au/forums/topic/171238-finally-tuned/#findComment-3158342
Share on other sites

Basti,

Lol, the 114rwkw at AUTOSALON was coz i had massive big range fuel cut and i was miss firing bad...

But, mods include...

- 3" exhaust w/ 6" cannon 4" tip

- Front mount intercooler 300x50076mm - JustJap

- Cold air intake

- Pod Filter

- SSQ BOV

- NGK race spark plugs - instead of having a pin for spark, they have a big flat area! gapped to 0.7mm

- GFB manual boost contoller

- Shell V-power Racing!

Thats all performance wise....

300x50076mm... daamn thats a big intercooler! :whistling:

From what I've seen the spark plugs with the big flat area are the copper type. The Iridium are usually the pin type. I could be wrong but those race plugs sound like the regular copper plugs? Anyway if you need to gap them down to 0.7mm to cure your misfire then expect a coil pack replacement in the near future :rolleyes:

Nice power from the mods though!

Link to comment
https://www.sau.com.au/forums/topic/171238-finally-tuned/#findComment-3158512
Share on other sites

And in regards to replacing coil packs, i won't have a problem with miss firing as the spark plugs are more than cable of running the car with the standard turbo.

I will only need to replace coil packs say if i do a high flow and start pushing for close to 300rwkw or so...

If u run the right plugs at the right gap, and the right sort of fuel, say good buy to miss firing!

Link to comment
https://www.sau.com.au/forums/topic/171238-finally-tuned/#findComment-3158656
Share on other sites

0.7 just seems a bit too much.. thats all!! no matter what plugs they are!!

0.75 seems alright..

Anyways if the cars happy, then thats all too it. .

Which safc do you have?

Please post a dyno graph.. Keen to see how the curve looks like!!

btw gd kw reading.. congrats!!

i was getting 183kw without any safc or tune on 10psi.. I had a nice curve, but i might invest in an safc soon.. Since i can get a hold of a power fc due to huge price..

Edited by siddr20
Link to comment
https://www.sau.com.au/forums/topic/171238-finally-tuned/#findComment-3158671
Share on other sites

Speaking of gapping sparkies,.....I bought a set of NGK Iridiums and wanted to gap it same as my old sparkies, but looking at the back of the packaging, it said "DO NOT REGAP THE SPARK PLUGS AS......"....so I left it at god know what gap (most likely 0.9 or 1) is that ok??

I'm not getting any misfire at that gap range.

Link to comment
https://www.sau.com.au/forums/topic/171238-finally-tuned/#findComment-3158819
Share on other sites

Speaking of gapping sparkies,.....I bought a set of NGK Iridiums and wanted to gap it same as my old sparkies, but looking at the back of the packaging, it said "DO NOT REGAP THE SPARK PLUGS AS......"....so I left it at god know what gap (most likely 0.9 or 1) is that ok??

I'm not getting any misfire at that gap range.

James, if you have a look at the part number for the spark plugs, it tells you what the standard gap is. For example, NGK's BKR5EIX-11's have a 1.1mm gap, it's the last two numbers that tell you what the gap is.

Link to comment
https://www.sau.com.au/forums/topic/171238-finally-tuned/#findComment-3158839
Share on other sites

YO DR1FT-SPEC....

picture224df1.th.jpgpicture230em5.th.jpgpicture234cq7.th.jpg

:P BASS IN YA FACE!

also, i can help you with the custom dump pipe if you like... i know some top notch people...

Hey homo-spec lol...

My boot is still going to look better than yours at S'n'S

Link to comment
https://www.sau.com.au/forums/topic/171238-finally-tuned/#findComment-3158904
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...