Jump to content
SAU Community

Recommended Posts

After talking with one of our Show 'n' Shine sponsors Pro Coat, I have organised a group buy on their two most popular services.

The group buy starts when we have 10 items booked in here on this thread and will end two months after that. Don't post up if you're not serious.

Turbo exhaust housings normally cost $110 to get coated but for the duration of the group buy paid up members of the various state clubs will pay $80 and ordinary forum members will pay $85. Basically you remove the housing from the turbo (not difficult and wont unbalance your turbo or anything like that) and send it to Pro Coat who are based on the Central Coast.

Exhaust manifolds normally cost $275 to $363 but for the group buy, paid up members will pay $242 and non members will pay $250.

I will have 100% confirmation of these prices and pictures as well as much more info tomorrow. Those of you who race will understand what's being offered here and so wont need the fluff. You can post your interest now. Everyone else, more info coming. :thumbsup:

Actually it's niether. It's the polished ceramic coating and looks like this.

4lt0gg1.jpg

4msr2bp.jpg

I'm trying to get a stock manifold with coating pic.

The black coating is much more expensive as not only is the raw material 4 times the cost of the polished ceramic, but it is actually applied over the top of it. So you have two layers.

Stuart at Pro Coat has told me that the black coating is more used in full racing situations. It's called TurboX. He can do this coating for us at a similar discount but may cost around an additional 80% on the above quoted prices. If there is demand for this I will get solid prices.

Here's a pic of the black coating.

6240hzn.jpg

Now you might like the polished look and get your bits coated for asthetic reasons but it's actually there to hold the heat in. Basically you get two benefits:

1. By maintaining heat in the exhaust gases you maintain the velocity. As the heat dissipates it loses velocity. In a turbo car you want that exhaust exiting as fast as possible.

2. Reduced engine bay temperatures.

Posts updated.

I suspect that I can get other discounts as a group buy once we have the numbers up so feel free to post up questions on any other parts you might want coated. He's got some pretty lurid colours available too. Personally I'm looking at the black graphite coating I think it is that transfers the heat out rather than holding it in. This is used on the inlet side of the engine, eg compressor covers and inlet manifolds. Better than paint for that RB26 plenum if yours is peeling.

  • 3 weeks later...

I have one quick question. the $242 price for a manifold (assuming you mean regular 6 cyl skyline manifold). what's the deal for GTRs which have 2 half sized manifolds? Is it still $242 (wishful thinking). Surely it wont be $242 X 2. Perhaps somewhere in the middle?

yeah, only if it's no big hassle. I have some new manifolds for the GTR and thinking I may coat them before fitting. thanks mate.

  • 2 weeks later...

All my engine bits n pieces are at Pro-Coat atm... Il post some before and after pics when I get them all back later this week :)

I am getting both the matt-black and polished ceramic on various pieces plus some other ones.

Just got my Greddy Plenum & 6boost mani back from Stuart yesterday........... small photo so you guys can see the results... will take some photos once its on the car this weekend....

post-30020-1185323355_thumb.jpg

I don't think there is enough interest here for the group buy to go ahead but I think if everyone who is interested ring Stuart and tell him this is where you found out about him. I'm sure he will do his best to look after you.

Unit 1/1 Clare Mace Cresent Berkeley Vale NSW 2261

Stuart Turnbull

Phone: 02 4388 9946

Email: [email protected]

  • 3 weeks later...

Hey guys.

Stuart here,

anybody that wishes to get parts coated just call the shop on

02 43889946

and ill look after you just mention the forum for great prices,

yes i do pistons

yes i do rocker cover etc.

cheers stuart

procoat

  • 2 weeks later...

A day late and a dollar short.........

I'm interested, I have a turbo housing, manifold, and wastegate base. I'll give Stuart a call, I'd actually like to discuss preparation, whether thread holes have to be bolted up, how are gasket surfaces masked off, etc.

If Stuart knows what he is doing and prefers to do it, fine...........or would he prefer me to do it and what material do I mask with etc. I really hate having a surface 'contaminated'. eg the wastegate valve guide???

Oohh and in black of cos'

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yep, it was only an option on the Q50 Hybrid.  Same in Japan as far as I know. And doesn't use a centre diff like the Suby's do, so not the same as the WRX.  But it also isn't a reactive AWD like other Nissan AWD vehicles are, eg. Murano/Xtrail/etc.
    • You should have got a Maine Coone then. Only thing is they're big. But so cool, and just like a dog. Or, just get yourself a high performance dog. That'll teach you for wanting Parkour indoors 😛
    • Are you thinking of Bens R32? I don't remember if his went through the bonnet itself, but it went through the chassis rail. Brad (RISKIN) bought it, and turned it into a track car. It's funny how anti people are of Jim Berry now. I remember when I pulled mine out (during an engine change) and inspected it and found it cracking badly. At that point in time so many people were even on SAU, were so pro Jim Berry, and that was after Bens GTR exploded his quite publically.
    • That's one of the reasons I got that breed, they look weird, the other reasons are they small, they are very vocal, and run around like they are on crack, I didn't want a breed that just sits around, these two are like kids on red cordial  My daughter has one, and it's a laugh riot, constantly doing Parkour around the house, sits on her shoulder, plays catch, and constantly runs around the house taking turns chasing the dog around, her Bermese though, just lays around with constant bitch face, and just looks on in utter disgust at the cat and dog playing together 
    • I'm getting PTSD flashbacks seeing that name again.  With my turbo swift, I got 1,500km of street use on a Jim Berry clutch before it exploded and took out my input shaft with it. 
×
×
  • Create New...