Jump to content
SAU Community

Recommended Posts

I tried this same post of Performace forums without much (thanks VRFOUR for the only worthwhile response)

G-Day all,

I'm a big fan of most Skyline's but I'm reasonably new to all this. I'm in the market for a new car, however I'm not a complete rev head who just wants something to go down the 1/4 mile in 10 secs. I want a very comfortable, quick, reliable and great looking car. So far I'm very keen on an R33 GTS-T Series II, which, from my research are available from about $23000 to $30000 depending on condition and mods.

Can anyone help me out with traps or things to look out for when buying one of these? I've got a couple to look at over the next few weeks and would like to be pre-armed with as much knowledge as possible.

Any help would be appreciated. Thanks,

Crazy.

Link to comment
https://www.sau.com.au/forums/topic/1714-skyline-help-please/
Share on other sites

Originally posted by Crazy

I want a very comfortable, quick, reliable and great looking car. So far I'm very keen on an R33 GTS-T Series II,

any skyline would fit that description.

if i were you i'd stay away from the sII as they are more expensive than the series I albeit they are newer.

if you want reliable buy something else ie. not a skyline

Link to comment
https://www.sau.com.au/forums/topic/1714-skyline-help-please/#findComment-32628
Share on other sites

Originally posted by ONARUN

if you want reliable buy something else ie. not a skyline

WTF?

Skylines have to be one of the most reliable cars on our roads today. Not to mention comfy, quick, and good looking!

If I were you Crazy, I'd go the Series 2, Much nicer inside, Dual Airbags, Updated headlights, which in my opinion look fantastic, and really make the car look alot newer than the series1. and a few other things. As for the turbos being a little different, that doesnt apply to you because youre not looking to modify it by the sounds of things.

For a nice clean spec2 you can expect to pay anything in that price range you said, they are more expensive than a spec1, but a lot nicer, and have a 'newer' feel to them. Plus, if you want something thats reliable, you would want something a little newer anyhow.

Things to look out for.

- K's wound Back

- Accident Damage

- Complied?

- Warranty (If you get from a daler make sure they provide you with a warranty)

- Hard Life (Make sure its been well maintained)

- Turbo

Its just like buying any car mate, get it fully inspected and checked out by a mechanic that you trust, then get it done again by someone else. If your happy with it, buy it! You wont regret it.

Also.. make sure you can afford to insure it :D

Link to comment
https://www.sau.com.au/forums/topic/1714-skyline-help-please/#findComment-32649
Share on other sites

Originally posted by ONARUN

if you want reliable buy something else ie. not a skyline

Yeh id say the only solution is SUPRA TT :lol:

Look for hairline fractures in the discs and as ex-static said accident damage and stuff.

Get a vehicle inspection and it will find most problems barr the internal things that look fine till they go POP.

Its a bit risky importing i reckon seeeing as you dont ge to drive or see the car b4hand and there are some dodgy dealers but u do get a warranty which is good . Abuse the hell out of it for 3000ks and if it pop it get replaced (always good to have piece of mind)

Look around for a good dealer and see what he has to offer and then make ure decision.

Link to comment
https://www.sau.com.au/forums/topic/1714-skyline-help-please/#findComment-32691
Share on other sites

A Supra,,,,get real,,,thats a Toyota,,,YUK,,,over weight,under powered,1st loosers car,,,,,Mate buy a S2 GTS-T,,,,very spunky car,,,especially in White. Check all Imports for rust,,,,,rear wheel arches,,,boot area and back of the front guards. If the car was used on a country type area in nippon land,,,they use salt on the roads....have a real good look underneath. Mines almost stock,,,just a cat back and wheels,,,,I'm more than happy. Not to many of the modded ones get away from me on a run,because they can't use or don't know how to use there extra horsepower.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/1714-skyline-help-please/#findComment-32865
Share on other sites

Originally posted by ONARUN

if you want reliable buy something else ie. not a skyline

George are u serious??

Crazy, i have done over 30,000kms in my car and have never had anything go wrong...the car now has 120,000kms on the clock.

I'm the same as you, I want performance, but I'm not after a car that runs fastest on the quarter mile.

so basically, yep, what ex-static said :D

Link to comment
https://www.sau.com.au/forums/topic/1714-skyline-help-please/#findComment-32880
Share on other sites

Originally posted by vjsam

you're gonna have to spend heaps to make a gts r33 run 10's. even gtr's have trouble doing that. if you want a 10 sec car buy a holden vl 3lt turbo and mod that. you can buy a 9 sec vl for about 15K.

vjsam,,,,You got it a bit wrong buddy,,,he's not after a 10 second car,,,he's after a comfortable,quick car,,,good looking car,,,,a VL is non of them,,,,oh okay Quick....but good looking,,,,,NOT. The only good thing about a VL is its drive train,,,every thing else is crappy.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/1714-skyline-help-please/#findComment-33010
Share on other sites

Your posts were very helpful, I have 2-3 R33's to look at, some series II's and some not.

How can I be sure that's it's fully complianced? I assume there will be a badge on it somewhere from the company that complianced it.....do I then check with the company or do I "trust" that they've done it properly?

Also, if anyone could tell me the exact differences between Series I and II, it would be greatly appreciated.

Thanks for your time!

Crazy.

Link to comment
https://www.sau.com.au/forums/topic/1714-skyline-help-please/#findComment-33300
Share on other sites

Your posts were very helpful, I have 2-3 R33's to look at, some series II's and some not.

How can I be sure that's it's fully complianced? I assume there will be a badge on it somewhere from the company that complianced it.....do I then check with the company or do I "trust" that they've done it properly?

Also, if anyone could tell me the exact differences between Series I and II, it would be greatly appreciated.

Thanks for your time!

Crazy.

Link to comment
https://www.sau.com.au/forums/topic/1714-skyline-help-please/#findComment-33303
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...