Jump to content
SAU Community

Recommended Posts

Had a good time watching all the cars ... was wondering what some peoples results were ... the best i can remember was most skylines getting 13's ... martin soarer doing low 13's ... an old school skyline doing 15's (about 45 times too i might add :P ) ... and excel in the low 13's ( i wonder whats under the bonnet??) ... that red rotary drag car doing a 9 something and made me deaf ... keirs 32gtr with a 10.42? also made me deaf ... lots of commies in the 13's 14's ... falcon with a 12.9?? oh yeah ... evos with low 13's and 180's in high 12's??

correct me if im wrong ..

Link to comment
https://www.sau.com.au/forums/topic/17154-drag-results/
Share on other sites

Very nice times there man! It certainly looked the goods.

The whole car was twisting and rocking at the 1st/2nd gearchanges - I was sure something was bound to snap with all that force/grunt! What mods do you have? Did you import the car yourself or is it local realease? (not sure if they sold them here or not).

Link to comment
https://www.sau.com.au/forums/topic/17154-drag-results/#findComment-355002
Share on other sites

my friend with me has an evo4 ... he didn't race it and it was parked outside with next to my car ... it used to be 224kw@all 4 ... that was with a hks turbo ... and motec computer tuned by rpm ... he never races his car though ... hes since taken out the big turbo and made everything stock agian ... lookin to sell this evo4

Link to comment
https://www.sau.com.au/forums/topic/17154-drag-results/#findComment-355087
Share on other sites

Good to see everyone out and finally put some faces to names.

I did 13 passes and my clutch didn't even stink on the way home!! Even though the commentator (Andrew I think) thought I was trying to fry it, with so many runs in a row.

The track was bloody slippery at first but good to see some nice rubber laid down throughout the day. I finally broke into the 12.4's running 15PSI with a 12.421 at 110.26MPH (60' 1.835sec).

Link to comment
https://www.sau.com.au/forums/topic/17154-drag-results/#findComment-355619
Share on other sites

Great day, thanks Ivan & crew from RPM. First time I've ever done it and was good to drive home OK (apart from a now leaking exhaust manifold that I'm told is no big deal for a while!).

13.42 ET, 106.5mph, best 60' was 2.11s.

Main thing is that I beat grepin, Chris32 and Bugalugs :burnout: Dare I say quickest GTS-T on the day! Bugalugs' run were amazing though, 13.44 I think and 106.99mph!! And that's with a stock ECU...good stuff.

grepin, do you now surender? Do we declare WW1 has been won by Freebaggin .... or should we wait until after the climactic battle this Sat at Tilbrooks for the outcome of WW1?

Then WW2 starts soon after!

Link to comment
https://www.sau.com.au/forums/topic/17154-drag-results/#findComment-355737
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...