Jump to content
SAU Community

Amp Mounting In R34gtt 2dr

blitza

By blitza,
in Car Audio & Electrical

 Share

Recommended Posts

blitza Collaborator

blitza

Posted
Posted

Hi All,

Just wanting some help. I've started buying bits and pieces of Audio gear for my R34, and I have bought a good speaker amp and have bought some 6.5" splits to go into the doors.

I am keen on a bit of a DIY job. I would be happy to pay a pro money, but i want to give it a shot myself. I have a bit of electrical experience so wiring isn't a problem. Its just I have absolutely no idea where to fit the stuff. Even though it is a pretty small amp (kicker kx200.2) it wont fit underneath either of the front seats. I had (what I thought) to be an ingenious idea to mount the amp on the back of the drives side front seat, where it is pretty much hidden inside the pocket. running the wires down to the floor would be an easy job and they would be hidden by the plastic knee board on the back of the seat. but I have been told by people that it wouldn't be enough cooling for the amp to sit inside the pocket. Any advice/feedback on this idea would be sweet.

Also, there are a few funny clips on the doors. When/if I attempt the speaker install, what are the best way to take these out as I would be pissed if I frigged up the interior!!

Many Thanks,

Steve

p.s. see attached photo :P

post-39264-1181037247_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/171546-amp-mounting-in-r34gtt-2dr/
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

why???? you run more risk of it burning up, more risk of it getting pinched , more risk of destroy cables. put it int h rear behind the rear seat. trav you suprise me sometimes...

Trav33 Mentor

Trav33

Posted
Posted
why???? you run more risk of it burning up, more risk of it getting pinched , more risk of destroy cables. put it int h rear behind the rear seat. trav you suprise me sometimes...

Surprise? Have you ever seen me pull a cat out a hat?!

Black_Widow34 Collaborator

Black_Widow34

Posted
Posted

U would have to make some sort of moulding for it behind the rear seat. Do not just screw it into the "wall" behind the rear seat as thats where the fuel tank is. I screwed mine down in the boot floor on the passangers side. Not pretty but works fine.

blitza Collaborator

blitza

Posted
  • Author
Posted

thanks guys for your responses,

For an update,

My plan was to buy a sub and mono amp, and have all of that installed nicely in the boot, keeping all the speakers etc, toward the front, just leaving the sub stuff in the boot. that was my plan. But if the ol' back of the back (on mdf) seat is the answer, then so be it. But keep me posted on any other ideas you may have.

Cheers!

what about underneath the rear seat? is there any roon?

DECIM8 Grand Master

DECIM8

Posted
Posted (edited)

Hey mate to remove the door panels the funny clips you push the centre in and pull the whole plug out :) dont forget to remove everything off the door and lift it up and off then unclip the power window thingo and poof its off..

now for your amp setup ..

Dsc00545.jpg

just a small idea i came up with .. not really happy with it but you never are reaLLY - dont over heat and doesnt move and looks ok what more do u want

I plan to get new cables and new sheath to cover the other cables in chrome/silver just to match the alpine and fusion amp.. and then the boot will go red/black with a sub in the spare tyre hole (inverted)

Edited by DECIM8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...