Jump to content
SAU Community

Recommended Posts

am wrecking a 90 R32 Gtr

will put up a list of buyable parts once i pull them off

until then hit me up and ill let you know if i can get the part

Location is Central queensland

Parts being held

Attesa oil pressure switch

pod filters and necks

A/C surround

rear speaker covers

boot trims

rear seats

drivers side seat belt assembly

steering wheel

AC centre vent

boot lid

rims and tyres

roof lining

front calipers + discs

diff

damage is to Passenger side wheel area most of the rest of the car is ok hope that will do for viable parts list

please all inquires via PM

also im working 12 hour shifts for approx 2 weeks longer so bare with me might take a little time for things to go along smoothly

Cheers

RellikZephyr

Edited by RellikZephyr
Link to comment
https://www.sau.com.au/forums/topic/171597-wrecking-32-gtr/
Share on other sites

All PM replied

sorry have been rather busy

please all queries via PM makes it bit easier (wasnt expecting so many queries so quickly)

ok parts being held

Attesa oil pressure switch

pod filters and necks

A/C surround

rear speaker covers

boot trims

rear seats

drivers side seat belt assembly

steering wheel

AC centre vent

Location is Central queensland for those that asked

am replying to all posts now via PM

sorry for lengthy replies

RellikZephyr

Link to comment
https://www.sau.com.au/forums/topic/171597-wrecking-32-gtr/#findComment-3166989
Share on other sites

all replies responded to via PM

sorry for slow replies

12 hr shifts 6 days a week and night shift stupid shut downs

almost finished approx 2 weeks more

but got this week end off so i will get into it for all parts being held

Thanks for your patience

RellikZephyr

Link to comment
https://www.sau.com.au/forums/topic/171597-wrecking-32-gtr/#findComment-3167036
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...