Jump to content
SAU Community

AFM problems - I think?

caminperth

By caminperth,
in Western Australia

 Share

Recommended Posts

caminperth Grand Master

caminperth

Posted
Posted

Hey guys - got a problem to report - wondering if anyone can help out.

Last night me thinks - it's cold, 0.9 bar is going to be waaay safe so I dial it in and plant it in fourth. At this point a few things happened - which have happened before:

first boost comes up - ok, all good

then suddenly everything cuts completely for about half a sec - felt like I'd turned the key off!

then it cuts back in...

then it misfires around 5000rpm - which I'm guessing is the plugs and I'm hopefully going to fix that problem today...

the first problem of the engine/revs cut I'm thinking is the AFM going past it's voltage limit and shutting down.. does this sound right? what can I do to fix it? I've sprayed/cleaned it with heaps and heaps of electrical cleaner which didn't seem to make much difference..

Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/17194-afm-problems-i-think/
Share on other sites
DanielGTST Apprentice

DanielGTST

Posted
Posted

Caminperth,

I had the same thing happen to me when I had my car at about 13psi while mucking around. It was fine on the dyno but as soon as it was on the road it would start to have the problem you described.

The guy told me that it would be even worse on a colder day due to the fact that there was too much air getting into the engine and the air/fuel ratios where not adjusting correctly on my stock ecu.

A SAFC would probably fix your problem, I have a simple Pivot air/fuel meter (1 universal setting) and adjusted it to make it a little bit leaner and it has fixed the problem for me.

I am no mechanic/tuner so it is just a suggestion ;)

Daniel

caminperth Grand Master

caminperth

Posted
  • Author
Posted

aidwin - as you said man - it's not the speed cut..

b005t - yea - i know what the speed cut is like and this ain't it. :rolleyes: and yea - am still running stock cooler...

adrian - could be - but it's fully intermitent..

bam - i wish i could afford the gtr!

daniel - i've got an afc and itc (old skool apexi fuel and ignition controllers) and that should sort out the fuel issuses at higher boost...

i fixed up the plug issue today - tho can't really try it out in this weather.. :)

still at a loss as to what it could be.. still got an inkling it's the airflow meter maxing out... will do it more when there's cold weather due to more air due to the density change... sound right?

GTS-t VSPEC Grand Master

GTS-t VSPEC

Posted
Posted

Cam,

It's the boost cut/fuel cut. The boost controller has nothing to do with it, it's the AFM that tells the computer when it senses too much air flowing, which means too much boost, and it will hit boost cut, resulting in a nasty sudden halt to the car:D

You'll need to replace your ECU or get a fuel cut defender to stop this happening. It is worsened by the fact you have a stock cooler, and cold air is denser, thereby the AFM senses more air flowing:D

Hope that made sense (and is true)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • niZmO_Man
      J50 clock date suddenly reset to January 1

      By niZmO_Man · Posted

      Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • niZmO_Man
      Wheel Sizes & Offsets For Skylines

      By niZmO_Man · Posted

      8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...