Jump to content
SAU Community

Recommended Posts

I lost my FAST install in a PC rebuild accident... :)

Can someone tell me if an S13 with a CA18DET(89) and a SR20DET(92) have the same clutch master cylinder?

i would so no, none of the numbers line up

Would you know the part numbers for the door window seals that are connected to the interior door cards on a R32 four door by any chance? mine are more wrinkled than my gran!

RHF 80834-01U00

LHF 80835-01U00

RHR 82834-01U00

LHR 82835-01U00

  • 2 weeks later...
  • 2 weeks later...
Hi Neil , is there a part number for the original R34 GTR MFD the whole unit including the housing, thanks

cheers,

David.

sorry bout late reply. There are 4 different part numbers for the MFD less the housing 2 for pre 08/00, and 2 for post 08/00

Pre 24845 AA414

Pre 24845 AA415

Post 24845 AA416

Post 24845 AA417

the housing is seperate Part No. 68411 AA400. hope it all help

sorry bout late reply. There are 4 different part numbers for the MFD less the housing 2 for pre 08/00, and 2 for post 08/00

Pre 24845 AA414

Pre 24845 AA415

Post 24845 AA416

Post 24845 AA417

the housing is seperate Part No. 68411 AA400. hope it all help

Thanks Neil , awsome help, most appreciated.

cheers,

David

  • 2 weeks later...

Hi,

Im hoping that you can help me find the part number for my brake master cylinder. The details are below:

CAR: 1993 R32 gts-t M-Spec with ABS

CHASSIS #: HCR32-292253

MODEL #: KRCR32RGFS3 FA

It appears to be different from most other R32's because apparently mine is a very late model R32 and it recieved a brake upgrade. I think the master cylinder has a 1 inch bore rather than a 15/16 inch bore like most of the others. The master cylinder has BM-50 on the side of it if that helps.

Thanks for any help,

Shaun.

can i please have part number for r33 gtst 1996

turbo studs (that bolt dump pipe on)

manifold to turbo gasket

thanks in advance

Are u sure they are studs my listing has them as bolts in any case Part No. 14434-V0301

and gasket No. is 14415-4P200

gah i dont have FAST installed on this puter, can someone please confirm which part this is.. is it the door trims that sit between the top of the door and the glass??

R32 Skyline

8083404U00

That number is a good number depending on a few other things with your care

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...