Jump to content
SAU Community

Recommended Posts

Looking for some trim parts for my S15. Looking for the outer door trim that sits on the top of the metal door and has the end that has a bracket that is screwed to the door itself. I need both Left anf Right.

Next is the metal track that runs perpendicular and sits in front of the quarter glasses and is the housing for the rubber seals. I need both sides in those as well.

Lastly, I need all the rubber sealing that fits around the door on the body of the car, not the door, that seals the door to the body of the car. I already have the door rubbers that attach to the door but not the one that attaches to the body. Can anyone help me please as I need these urgently.

If I can get pictures I can confirm. I also need these small items shipped to me in Trinidad in the Caribbean, postal code is TT. If they can be had used as well I am interested as I need them urgently please.

Jason.

Looking for some trim parts for my S15. Looking for the outer door trim that sits on the top of the metal door and has the end that has a bracket that is screwed to the door itself. I need both Left anf Right.

Next is the metal track that runs perpendicular and sits in front of the quarter glasses and is the housing for the rubber seals. I need both sides in those as well.

Lastly, I need all the rubber sealing that fits around the door on the body of the car, not the door, that seals the door to the body of the car. I already have the door rubbers that attach to the door but not the one that attaches to the body. Can anyone help me please as I need these urgently.

If I can get pictures I can confirm. I also need these small items shipped to me in Trinidad in the Caribbean, postal code is TT. If they can be had used as well I am interested as I need them urgently please.

Jason.

for the first ones ( door belt moulds ) part No.

80820-85F10 RH

80821-85F10 LH

for the second request i am not to sure the first to No. are retainers that look to hold the top door weather strip. and the seconed No. look to hold the QTR glass it's self

76872-85F00 RH

76873-85F00 LH

82328-92F00 RH

82329-92F00 LH

and for your final request i would need to know more info on your car. I can't help u with shipping or prices, sorry

for the first ones ( door belt moulds ) part No.

80820-85F10 RH

80821-85F10 LH

for the second request i am not to sure the first to No. are retainers that look to hold the top door weather strip. and the seconed No. look to hold the QTR glass it's self

76872-85F00 RH

76873-85F00 LH

82328-92F00 RH

82329-92F00 LH

and for your final request i would need to know more info on your car. I can't help u with shipping or prices, sorry

Thanks again.

Hi Guys

Forgive the idiotic nubi question, but I'm looking for the part number for a '00 R34 GTT (RB25DET Neo) Engine Loom..

If there are multiple part numbers is it possible to get a listing?

Thanks..

Hi Guys

Forgive the idiotic nubi question, but I'm looking for the part number for a '00 R34 GTT (RB25DET Neo) Engine Loom..

If there are multiple part numbers is it possible to get a listing?

Thanks..

what parts do u need for tis engine wiring loom because there are about 3 looms that do all of the engine bay. and more info would help like a vin number

hey,

do you guys have the part number for the studs and nuts

R32GTR

1. Turbo to dump pipe

2. Turbo to exhaust manifold

is there a part number for a turbo gasket kit

there is a gasket kit Part No. 14401-05U25

what parts do u need for tis engine wiring loom because there are about 3 looms that do all of the engine bay. and more info would help like a vin number

If it helps, from what I have been told I need them all, as the car is a NA+T transplant. VIN number won;t be much use as the car is originally a NA and this is to a stock Turbo ECU that is being attempted to get working right :down:

Hence would need part numbers for the stock turbo gear from any 34 GTT, the more the merrier.

  • 4 weeks later...

Hi there,

Can someone help me out with part numbers for:

R33 GTR bonnet hinges; left and right.

R33 GTR bonnet catch/upright.

R33 GTR guard raiser brackets; left and right.

Having a bit of trouble finding these locally so am looking at sourcing them from Japan.

Thanks,

Rob.

  • 2 weeks later...

Hi can i get the part numbers for:

r34 xenon drivers side headlight

r34 gtr bonnet, fenders left hand and right handside,

thanks.

does anyone know where i can get these parts other than nissan genuine, they keep bothering me about these part/model numbers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...