Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
  • 2 weeks later...
Bit of a small thing but need the number for the standard speaker covers for the rear speakers in my series 2 r34 GTT (unsure if different to series 1 have been told they are)

28174-5P600 RH

28175-5p600 LH

those should be close, however being a trim part i would prefer to have a vin number

Does anybody knows the part numbers from:

R34 GTR Front Bumper V-spec

And the optional lip

Also the R34 GTR Front bonnet V-spec

And Front fenders from R34 GTR.

Thank you all!

Akis.

Front bar F2022-AA4MD

Front lip 96015-AA440

Bonnet F5100-AA4MM

Fender RH 63112-AA430

Fender LH 63113-AA430

Need part number for 1990 RB26 non n1 waterpump..

Searched but i have found like 3 - 4 different part numbers!

I think 21010-58S25- may be correct can someone confirm for me?

21010-58S25 is a good number for R32 RB26DETT engine

urgently need the part number for the seal between the injector rail and injector intake.

much appreciated if someone could help me out.

cheers.

please confirm if highlighted part is correct?? (poor description)

post-42804-1267238727_thumb.jpg

Does anyone have the part number for R34 GTR front fenders? Looking at doing a GTR front end conversion on my 4 door 34. Thanks.

please refer previous post about GT-R vspec fenders, bonnet and front bar. guard part NO. are the same

hi i'm after the headlight switch on the side of the gauge cluster (have the one headlight problem, pulled it apart but it's totally screwed) :)

bnr32

1992

model: KBNR32RXFS AA

chassis: BNR32-221349

thanks

did some searching came up with this:

25160-01U00- Switch Assy - Lighting no

can anyone confirm?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...