Jump to content
SAU Community

Recommended Posts

hey guys how accurate is the stock oil pressure guage on the dash? cause mines doin wierd things....like when i go around 70 then step on the brakes and then slow down my oil guage points to the 0 and the oil light comes on i know this is indicating that it may be low on oil...

but as soon as the car is stationary...then oil needle climbs back onto the 2....so yeah wierd problem :P hmmmi can't check the oil cause i have no dip stick atm so yeah ! ;) or would it be a dodgy oil controler or etc ? the car has been servicd with mobil 1 fully synthetic oil around 1000 km ago...and i also topped up a little with the 1 litre bottles so yeah danno if its empty on oil or the guage is just being gay and not working properly the car also has a leak on the half moon seals so thus why i bought the 1 litre bottle from b4 to top up ne loss in oils the oil i poored in from the service was about 5L's

cheers

chi

Link to comment
https://www.sau.com.au/forums/topic/173071-oil-pressure-quesiton/
Share on other sites

hmmm the needle goes from 0-to 2 then goes back to zero and the lights on ...from what i see that the engine is only leaking oil at the half moon seals so woudl that be causing the pressure drop or what ever its doin?

Cheers

Chi

Chi, get ur oil digstick sorted asap!

sounds like you are low on oil; i find my oil pressure gauge not to work so well BUT when if the light is coming on that is not good!

Like my oil prssure gauge uses to sometimes read my oil pressure was just above zero and then some other times it would read fine, but i never had a issue with my light coming on.

When my oil light did come on it was cuz i didnt have any oil at all (blew the oil line in 2), so if ur light is coming on thats not good...

i would maybe think about putting a litre or two of oil into your car BUT then you dont really want to overfill it cuz thats not good too

Cheers Michael

hmmm the wierd thing about it is ....it like goes upto 2 and then drops down to zero then rises back upto 2 then drops again man its hell dodgy....hmmm i think i got oil in there...would it be teh like oil guage playing up>?

Cheers

Chi

Chi, get ur oil digstick sorted asap!

sounds like you are low on oil; i find my oil pressure gauge not to work so well BUT when if the light is coming on that is not good!

Like my oil prssure gauge uses to sometimes read my oil pressure was just above zero and then some other times it would read fine, but i never had a issue with my light coming on.

When my oil light did come on it was cuz i didnt have any oil at all (blew the oil line in 2), so if ur light is coming on thats not good...

i would maybe think about putting a litre or two of oil into your car BUT then you dont really want to overfill it cuz thats not good too

Cheers Michael

lol that reminds me of a f**kin idiot friend i have who once poured about 8 litres of oil into his car cos it wasnt full, but it only had an 8 litre tank and was already pretty much full, about 5 kays down the road a massive smoke cloud drowned out 4 lanes of traffic

DONT OVER FILL WITH OIL !!!

hmmmm lol ill put 1 L of oil in there and see aye :whistling: but yeah its a hell wierd problem aye :? like when i brake...it goes to zero...but now when i drive normally ....and like i see the poil pressure guage rise....but no over 2 then it just drops back to zero and the red light comes on :? im pretty paranoid aye ! :P so yeah need as much info as i can :yes:

Cheers

Chi

the oil indicator is dodgy on most skylines. Mine constantly sits on 0 and floats around.

Although the light works on a seperate sensor and if that comes on, that is no good.

Best to go to a mech and get a oil pressure test done, as that light should not be coming on at all :whistling:

hmmm yeah ill attack the sump wiht ya :whistling: u tell me when u want to do it with me mike :P hmmm yeah i guess that can be another reason..with the reader at the back but hmmm i just hope everythigns alright i hope iget about more then 1L of oil when i drain the motor tomorow morning

Cheers

Chi

hmmm so what kermit is saying so basically if i over topped the engine with the oil then my 2 sensors will go off? but how ? isn't it only the sensors will go off when the oil levels are low? can somoen please explain it to me?

Cheers

Chi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...