Jump to content
SAU Community

Recommended Posts

hey guys how accurate is the stock oil pressure guage on the dash? cause mines doin wierd things....like when i go around 70 then step on the brakes and then slow down my oil guage points to the 0 and the oil light comes on i know this is indicating that it may be low on oil...

but as soon as the car is stationary...then oil needle climbs back onto the 2....so yeah wierd problem :P hmmmi can't check the oil cause i have no dip stick atm so yeah ! ;) or would it be a dodgy oil controler or etc ? the car has been servicd with mobil 1 fully synthetic oil around 1000 km ago...and i also topped up a little with the 1 litre bottles so yeah danno if its empty on oil or the guage is just being gay and not working properly the car also has a leak on the half moon seals so thus why i bought the 1 litre bottle from b4 to top up ne loss in oils the oil i poored in from the service was about 5L's

cheers

chi

Link to comment
https://www.sau.com.au/forums/topic/173071-oil-pressure-quesiton/
Share on other sites

hmmm the needle goes from 0-to 2 then goes back to zero and the lights on ...from what i see that the engine is only leaking oil at the half moon seals so woudl that be causing the pressure drop or what ever its doin?

Cheers

Chi

Chi, get ur oil digstick sorted asap!

sounds like you are low on oil; i find my oil pressure gauge not to work so well BUT when if the light is coming on that is not good!

Like my oil prssure gauge uses to sometimes read my oil pressure was just above zero and then some other times it would read fine, but i never had a issue with my light coming on.

When my oil light did come on it was cuz i didnt have any oil at all (blew the oil line in 2), so if ur light is coming on thats not good...

i would maybe think about putting a litre or two of oil into your car BUT then you dont really want to overfill it cuz thats not good too

Cheers Michael

hmmm the wierd thing about it is ....it like goes upto 2 and then drops down to zero then rises back upto 2 then drops again man its hell dodgy....hmmm i think i got oil in there...would it be teh like oil guage playing up>?

Cheers

Chi

Chi, get ur oil digstick sorted asap!

sounds like you are low on oil; i find my oil pressure gauge not to work so well BUT when if the light is coming on that is not good!

Like my oil prssure gauge uses to sometimes read my oil pressure was just above zero and then some other times it would read fine, but i never had a issue with my light coming on.

When my oil light did come on it was cuz i didnt have any oil at all (blew the oil line in 2), so if ur light is coming on thats not good...

i would maybe think about putting a litre or two of oil into your car BUT then you dont really want to overfill it cuz thats not good too

Cheers Michael

lol that reminds me of a f**kin idiot friend i have who once poured about 8 litres of oil into his car cos it wasnt full, but it only had an 8 litre tank and was already pretty much full, about 5 kays down the road a massive smoke cloud drowned out 4 lanes of traffic

DONT OVER FILL WITH OIL !!!

hmmmm lol ill put 1 L of oil in there and see aye :whistling: but yeah its a hell wierd problem aye :? like when i brake...it goes to zero...but now when i drive normally ....and like i see the poil pressure guage rise....but no over 2 then it just drops back to zero and the red light comes on :? im pretty paranoid aye ! :P so yeah need as much info as i can :yes:

Cheers

Chi

the oil indicator is dodgy on most skylines. Mine constantly sits on 0 and floats around.

Although the light works on a seperate sensor and if that comes on, that is no good.

Best to go to a mech and get a oil pressure test done, as that light should not be coming on at all :whistling:

hmmm yeah ill attack the sump wiht ya :whistling: u tell me when u want to do it with me mike :P hmmm yeah i guess that can be another reason..with the reader at the back but hmmm i just hope everythigns alright i hope iget about more then 1L of oil when i drain the motor tomorow morning

Cheers

Chi

hmmm so what kermit is saying so basically if i over topped the engine with the oil then my 2 sensors will go off? but how ? isn't it only the sensors will go off when the oil levels are low? can somoen please explain it to me?

Cheers

Chi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...