Jump to content
SAU Community

Recommended Posts

Hey guys,

Couldn't find anything about the G-Tech performance meter on this forum.

My question is, do these performance meters live up to the hype?

I'd really like the opinions of people who have one and have compared things actual power, 1/4 times and torque to the G-tech values, rather than 'I have a mate who has one of these and says...

Here is two different models I'm considering buying:

http://cgi.ebay.com.au/G-TECH-GTECH-PRO-SS...bayphotohosting

http://cgi.ebay.com.au/G-TECH-PRO-RR-ONBOA...1QQcmdZViewItem

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/173102-g-tech-performance-meter/
Share on other sites

the g-tech i have is a little older then those and not as many features. they are a very good indication but not 100% accurate. also not recommended for the street as there is very high speeds involved when dong a 1/4 mile pass :D

isn't that what the strip's for?

Yeah, I meant just more for launches and stuff. I've got a 110km/h road near me that sees very little use, so I can accelerate up to 110, which is good but I've got no way of monitoring performance. The closest drag strip to me is an hour and a half away so I don't get that many occasions to get down there. I'm not looking to piss people off with idiotic story's just trying to determine if the g-tech units are worth the money.

the g-tech i have is a little older then those and not as many features. they are a very good indication but not 100% accurate. also not recommended for the street as there is very high speeds involved when dong a 1/4 mile pass :D

Cheers for your response, do they actually give a good indication of HP?

Ive got the last model,

Handy little unit, very consistant and i think its supposed to be accurate to 1/10th of a second or something.

Regardless of its accuracy compared to the track, its good to compare results between mods.

Take it for what it is...a good little performance indicator, but its not the be all and end all.

There are a total of four different units.

The cheap ones you see on EBay are the oldest.

The RR & SS models are the most recent.

I have an RR. In short for the money they are very, very good. They can accurately give you a quarter mile time & at the same time via the downloads allow you to see (in the comfort of your lounge room) which rpm launches worked best. When used on the circuit they can allow you to pinpoint the effectiveness of different modifications you may have made to your car. I would thouroughly recommned them if you want to dip your toes into the cheaper end of the data logging world.

Oh and don't bother buying the old, cheap ones. They are nowhere near as good.

Edited by djr81

I've got one of the new G-Tech SS' and its quite good. I find it reasonably accurate (G-Tech time vs stopwatch time), but I mainly use it to measure lateral G's. ;)

I'm up to 1.23G's on 17" RT215s, and 1.29Gs on 18" D02G's.

Thanks for the last few responses, very informative. I've decided to import a ss unit directly from G-Tech.

To be honest for the extra coin I would recommend the RR.

You can log & export data & then use it how ever you like. The attached image shows a gain in both balance & lateral grip. Obviously the circuit is anticlockwise.

post-5134-1182212866_thumb.jpg

Edited by djr81
  • 6 months later...
  • 4 weeks later...

I'm also interested in picking up one of these...but not for timing or drag info, more so, i'm after one to log information pre and post modification, so i can test certain equipment and see if it makes any sort of a gain/difference without having to 'feel' for it. Sometimes one may be overcome by the money they've spent on an modification, that they believe that it really DOES make a difference, when it doesn't...is this performance measuring tool accurate in terms of, Power and Acceleration?

Cheers,

Cartz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...