Jump to content
SAU Community

Bcnr33 Ecu Install In Bnr34

GloriaShield
 Share

Recommended Posts

GloriaShield Contributor

GloriaShield

Posted
  • Author
Posted (edited)
buy an BNR34 ecu

Here is south korea. my bnr34 is grey import vehicle and my country don't have any nissan service center for my car.

I have called nissan service center in japan, they said "you must register your dealer, and buy ecu" :thumbsup:

Edited by GloriaShield
GloriaShield Contributor

GloriaShield

Posted
  • Author
Posted (edited)
import ecu from japan - use an importer to get it

It has a problem. They can not setup immobilizer, because they don't have nissan consult. It is only too true. :thumbsup:

Edited by GloriaShield
STATUS Grand Master

STATUS

Posted
Posted
I thought the R34 had a different ignition setup, hence there is a different PFC model for the R34.

So how does the R33 ECU get around it?

i have seen a few R34's running R33 ECU's (cars most likely stolen ex japan) it seems to be fairly common in europe too where alot of the no so legit cars end up. i have been trying to source a r34 gtr wiring diagram for ages but the only one i can find is paulr33's and its not working, reason being is i have a few excess r34 gtr fc's and want to use them on r32/33 it can be done i just need the diagrams.... :D

  • 2 weeks later...
GloriaShield Contributor

GloriaShield

Posted
  • Author
Posted

I fitted a PowerFC to my bnr34 gtr, It wont run at all. Plugged it in properly. Turned off the boost control function.

Maybe immobilizer problem. My country don't have nissan service center. I can't re-code.

I want.. remove immobilizer.

help me please.

wrxhoon Grand Master

wrxhoon

Posted
Posted
I fitted a PowerFC to my bnr34 gtr, It wont run at all. Plugged it in properly. Turned off the boost control function.

Maybe immobilizer problem. My country don't have nissan service center. I can't re-code.

I want.. remove immobilizer.

help me please.

When you say " it won't run" , do you mean , it wont start? wont kick? If it won't kick the trarter you probably have some other electrical problem . Could be immobiliser , just by-pass it and see how you go .

If you don't know how to do it , its not easy, take it to an auto electrician , he should be able to sort it out for you . The s15 200sx has a similar set up , if you have them in your counrty .

GloriaShield Contributor

GloriaShield

Posted
  • Author
Posted (edited)
When you say " it won't run" , do you mean , it wont start? wont kick? If it won't kick the trarter you probably have some other electrical problem . Could be immobiliser , just by-pass it and see how you go .

If you don't know how to do it , its not easy, take it to an auto electrician , he should be able to sort it out for you . The s15 200sx has a similar set up , if you have them in your counrty .

maybe, imobilizer system cuts fuel not spark. by-pass? how ...?

need a standard r34 gtr ecu without mods to get my keys recoded for the immobilizer.

I still want to fix my car so i can use my new power fc ... anyone any ideas....

Edited by GloriaShield
  • 3 weeks later...
ylwgtr2 Grand Master

ylwgtr2

Posted
Posted (edited)
maybe, imobilizer system cuts fuel not spark. by-pass? how ...?

need a standard r34 gtr ecu without mods to get my keys recoded for the immobilizer.

I still want to fix my car so i can use my new power fc ... anyone any ideas....

the key does not talk directly to the ECU on a 34 GTR....the key talks to the immobilizer box then that talks to the ECU....so any 34 GTR ecu will run your car.....providing the key and the immobilizer are mated to each other,you shouldnt have a problem

Edited by ylwgtr2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Duncan
      R33 GTR running -9 with no tune

      By Duncan · Posted

      Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Duncan
      Coolant leak?

      By Duncan · Posted

      Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...