Jump to content
SAU Community

Recommended Posts

  • Replies 951
  • Created
  • Last Reply

Top Posters In This Topic

I have sent you all pm's let me know how many nights you are staying and I will book the cabins for us :)

There will only be 6 to a cabin Max! and two people have to sleep on the queen size bed and 4 on the single bunk beds...so let me know if you want to be paired up or percific people in your cabin???i.e not the snorers lol!!

Can we please get a list of people that are coming down to spectate and be our NSW support crew!!!

We need to sort out accomodation asap and I need to starting getting numbers so can see how many cabins we need :)

Please confirm if you wish to come down to DECA for an excellent weekend away...

Spectator list:

Henry (Vic's Cousin)

DRD-OOF

Jason (Andos mate)

Kelly(you in if you like it or not!)

Nigel??

Tinks??

Jet R32??

Jess - Morgs might be coming also as a spectator, but he lives in VIC already so he wont need accomo

Coolies :D

How many days are you staying down at DECA and do you want a bed in one of the cabins?

Or you going to snob us and go to a hotel

I'm happy to have someone ride down with me, but I'm headed down Thursday as I'm headed to Winton of Friday for a track day. Several of us will be getting a cabin starting Thursday night.

For a seriously long drive its actually a pretty good time.

Like has been mentioned we're going down way early but im taking the XR6 and trailer, if anyone has spare stuff like wheels etc they want carted down let myself or corinne know and we can organise to take them.

Jess I was talking to andrew about tires last week. Im going to be using a new set of R888's at winton and Corinne will also have a new set on too.

Brad

Edited by Risking



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...