Jump to content
SAU Community

Recommended Posts

So basically ive got $35,000 to spend including the buying of the car.

Selling my 180sx right now and im upgrading to a R32 GTR.

I was thinking $20,000 for a basic nice condition GTR so that would leave me with about $15,000 to play with.

My question is what mods should i get and what would be the power ill be looking at most probibly a good question for people that have already gone down a similar path what quater miles do you run aswell.

Oh and my names Rory nice to meet you all :P

Link to comment
https://www.sau.com.au/forums/topic/174790-r32-gtr-plans/
Share on other sites

do everything at once to save some time and money on re-tunes.

I bought a stockish car and went down a similar path to you. First off i fixed any mechanical issues with the car like brakes, belts, fluids, 100k service. Make sure the engine is healthy to save you pulling it apart during the build up.

Then i collected...

turbos GT-SS

injectors (sard)

cam gears (arospeed)

fuel pump (nismo)

afms (nismo)

dumps (tomei)

Power FC

02 sensors (nissan)

metal cat :P

Coil packs (splitfires)

....and fitted everything apart from the turbos/dumps and cam gears myself to again save money. I paid a little extra and went for some nismo components for ease of install.

im still hoping to run a mid-high 11 with a bit over 400rwhp.

The car already came with a twin plate, exhaust, bilstein shocks, eibach springs, ARC cooler and Greddy hard pipe kit.

I know its an old engine but it makes power early which enables me to keep revs below 7500rpm, hopefully prolonging its life a little longer.

I only boost once oil is over 70 degrees celcius also.

Welcome aboard Rory!

Edited by SLIPPERY
Link to comment
https://www.sau.com.au/forums/topic/174790-r32-gtr-plans/#findComment-3205783
Share on other sites

Ill do prices aswell..

turbos GT-SS $2800

injectors (sard) $580

cam gears (arospeed) $180

fuel pump (nismo) $550

afms (nismo) $400

dumps (tomei) $600

Power FC $950

02 sensors (nissan) $420

metal cat smile.gif $250

Coils (splitfires) $470

Labour for turbos and tune: $2600

Total.... $9800

Link to comment
https://www.sau.com.au/forums/topic/174790-r32-gtr-plans/#findComment-3205786
Share on other sites

Basically i want to get as much "SAFE" power possible out of the rb26 without doing any internals. Will probibly keep it like that for a while and just save alot to be able to build the engine all at once internally.

Was thinking of somewere along the lines of getting this for now:

2 new turbos "What size is appropriate for no internal work and max safe tune power"

cam

injectors

fuelpump

powerfc

boost controller

exhaust

pods

Would i need an oil cooler and stuff or isnt that needed untill your really pushing for more power and going passed that safe point.

Also what is the safe point in a rb26 owning a 180sx i know the sr20 safe point can go upto 280rwhp and then youll have to start looking at building a stronger engine.

Link to comment
https://www.sau.com.au/forums/topic/174790-r32-gtr-plans/#findComment-3205806
Share on other sites

400rwhp is a figure a lot of original engines are still able to push out fairly reliably

The turbo choice for a non built motor would be GT-SS's, garrett 2860-7s or -5s, & 2530s.

A stock motor wont be able to completely push the -5s or 2530s though but would serve well in the mean time if you needed to rebuild the engine later

An oil cooler is a good idea for a rb that sees trackwork.

Link to comment
https://www.sau.com.au/forums/topic/174790-r32-gtr-plans/#findComment-3205818
Share on other sites

Look for a GTR with a built motor, you'll find one floating around the 35k range easily enough.

A 20k GTR is going to be average at best

Better doing it that way then buying a 32, and then lean on the motor and little and it goes pop.

Then all of a sudden your 15k is totally blown away :P

Link to comment
https://www.sau.com.au/forums/topic/174790-r32-gtr-plans/#findComment-3205852
Share on other sites

You can get a nicely modified gtr these days in the high 20's, then just keep the extra $5k for changeover, insurance and anything minor that needs doing.

Sure buying a stockish gtr and pumping $15k into it might be alot of fun but its definitely the most expensive way of going about it.

Link to comment
https://www.sau.com.au/forums/topic/174790-r32-gtr-plans/#findComment-3205913
Share on other sites

Look for a GTR with a built motor, you'll find one floating around the 35k range easily enough.

A 20k GTR is going to be average at best

Better doing it that way then buying a 32, and then lean on the motor and little and it goes pop.

Then all of a sudden your 15k is totally blown away ;)

:P

Link to comment
https://www.sau.com.au/forums/topic/174790-r32-gtr-plans/#findComment-3205983
Share on other sites

im even with the other guys...buy one with a good built motor. I looked for a while in WA when i was buying but couldnt find anything.

But hey, if you want to build one yourself and be sure of the condition then theres a guideline there

Edited by SLIPPERY
Link to comment
https://www.sau.com.au/forums/topic/174790-r32-gtr-plans/#findComment-3206279
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...