Jump to content
SAU Community

Recommended Posts

hey guys, just bought my first turbo car which is a R32 gts-t and have some general knowledge about it but would like to know what are some good basic mods i can do to get the hp up. Not looking for huge amounts of power just yet but would like something around 250rwhp for now. Had it dyno'd a few weeks back at Hyperdrive in Malaga, good shop btw :thumbsup: and it made 190rwhp on 9-10psi which i have had turned up to run 13psi on high boost setting which is making 208rwhp.

The mods it has now are:

cat back exhaust, which im planning on finishing soon.

K&N air filter.

larger fuel pump and tank.

Frount mount intercooler.

Heavy duty button clutch.

Profec B boost controller.

Greddy Type R/S BOV.

So as you can see its pretty stock and would appreciate any feedback.

Oh, will try and get pics up ASAP

Edited by Zell
Link to comment
https://www.sau.com.au/forums/topic/175239-first-turbo/
Share on other sites

well firstly welcome to the world of skylines and to the forum :O

basically the next thing you should be doing is finishing off the exhaust, should reduce restriction and hopefully gain some hp there,

im guessing after that you should be looking at a type piggyback ecu or depending on your budget a standalone system (good luck finding a power fc :thumbsup:)

one main thing to remember on these forums is to use the search function, which you will find to answer a few of your questions.

sam :D

Link to comment
https://www.sau.com.au/forums/topic/175239-first-turbo/#findComment-3211470
Share on other sites

Nice mate, I just got my first turbo (RWD car for that matter) last week. While on the subject of mods does anyone know the price I should be paying for a decent fmi, I seen a hybrid kit they anygood for I think $900 diy? Because Im looking at getting the 400R front which is $995! wreckers anyone? Dump pipe hey ill have to look out for one of those.

Link to comment
https://www.sau.com.au/forums/topic/175239-first-turbo/#findComment-3211783
Share on other sites

Nice mate, I just got my first turbo (RWD car for that matter) last week. While on the subject of mods does anyone know the price I should be paying for a decent fmi, I seen a hybrid kit they anygood for I think $900 diy? Because Im looking at getting the 400R front which is $995! wreckers anyone? Dump pipe hey ill have to look out for one of those.

900$ for a hybrid sounds like you are gettin ripped

Link to comment
https://www.sau.com.au/forums/topic/175239-first-turbo/#findComment-3212196
Share on other sites

Yeah lots of people with RB20s seem to think the rb25 turbo makes a great difference.. wont cost too much either. Quite often people on here are selling them for $200 - $400ish. While you putting that on get the front/dump pipe done to finish your exhaust off :D

While on the subject of mods does anyone know the price I should be paying for a decent fmi, I seen a hybrid kit they anygood for I think $900 diy? Because Im looking at getting the 400R front which is $995! wreckers anyone? Dump pipe hey ill have to look out for one of those.

My cooler was $550(DIY) from autoworx.. its about 76mm wide and didn't need to cut the 400R front bar.

Link to comment
https://www.sau.com.au/forums/topic/175239-first-turbo/#findComment-3212310
Share on other sites

Alright cool. I just found the exact same fm for $450 brand new so I might get it from there. Cant beat Paul for service though and knowing his skylines! (almost bought a car from his but didnt). Where abouts did you grab your 400R front bar from, and what price roughly? If ya dont mind me asking.

Edited by Dani Boi
Link to comment
https://www.sau.com.au/forums/topic/175239-first-turbo/#findComment-3212406
Share on other sites

My car came with the 400R front, just fitted the matching 400R side skirts from mitchy's wreck.. rear bar OR maybe just pods are up next. I did see a full 400R kit on ebay, can't remember how much it was but I dunno if I would trust something from ebay to come to me without something being dodgy or it gets broken..

Link to comment
https://www.sau.com.au/forums/topic/175239-first-turbo/#findComment-3212485
Share on other sites

hey guys, thanks for the feedback. Now have a good idea of what is needed. The RB25 turbo i have also heard seems to run fairly well on the RB20, anyways finally got a chance to take some pics of the car for you guys to see :D. For some reason the pics seem to take for ever to upload onto this post so i have stored them in my gallery. Not sure if i need to add a link here somehow or if you guys can just look me up as a member and see the gallery that way

Link to comment
https://www.sau.com.au/forums/topic/175239-first-turbo/#findComment-3212944
Share on other sites

if i were you i would go for something bigger than the rb25 turbo.

if you go to the effort to change the turbo, may as well put something decent on :(

and 250rwhp will be pushing the thing

Effort? it took 2hrs to do my swap and it was a direct swap, the only other thing that would be as easy to do is to buy the rb25 turbo and get it hiflowed before putting it on.

Link to comment
https://www.sau.com.au/forums/topic/175239-first-turbo/#findComment-3214484
Share on other sites

Effort? it took 2hrs to do my swap and it was a direct swap, the only other thing that would be as easy to do is to buy the rb25 turbo and get it hiflowed before putting it on.

direct swap? doesnt the oil feed banjo bolt on the 20 lines have a bigger hole? or did you use the 25 lines?

why are you asking about a front mount intercooler when the pictures already show one??? i'm confused

Link to comment
https://www.sau.com.au/forums/topic/175239-first-turbo/#findComment-3214752
Share on other sites

direct swap? doesnt the oil feed banjo bolt on the 20 lines have a bigger hole? or did you use the 25 lines?

why are you asking about a front mount intercooler when the pictures already show one??? i'm confused

Car belongs to Zell, and Dani Boi is the one askin about the cooler.

Link to comment
https://www.sau.com.au/forums/topic/175239-first-turbo/#findComment-3214780
Share on other sites

direct swap? doesnt the oil feed banjo bolt on the 20 lines have a bigger hole? or did you use the 25 lines?

why are you asking about a front mount intercooler when the pictures already show one??? i'm confused

I have heard this too but maybe I just got lucky, everything was a direct swap - I have a series 1 RB25 turbo with the steel compressor wheel so that could be why. Straight swap, easy as coz we did it at my mates workshop and he's pretty cluey with RB motors. The hardest part was wiggling the old turbo out and the new turbo in ;)

Link to comment
https://www.sau.com.au/forums/topic/175239-first-turbo/#findComment-3215925
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...