Jump to content
SAU Community

About To Go Do The Hks Gt-rs Route

nsta

By nsta,
in Engines & Forced Induction

 Share

Recommended Posts

nsta Mentor

nsta

Posted
Posted (edited)

Hey guys, just need to know if theres anything ill need to support the hks gt-rsturbo kit against what i have now

Heres my current mods:

R33 skyline gts25t series 1 '94

3" exhaust into split dump pipe

hybrid FMIC

Apexi pod

Splitfire coilpacks and ngk bcpr6es

new fuel filter

bosch 040 fuel pump

sau boost tap

stock ecu

stock turbo running 10psi

Im aiming for around 250rwkw......heres a list of things i dont know whether i need or not:

nismo injectors(550 or 700cc)

apexi powerfc

new head gasket

Fuel pressure regulator

turbo manifold?

And my other question:

whats involved in the replacement from stock to hks gt-rsturbo kit?and does the kit come with everything ill need to bolt it all straight up?, is it a low turbo mount(will i need to change the manifold)?, and how much labour involved approx, im thinking of doing it all myself.

I know alot of people on here have done it, i just want to do it right the first time, meaning i will buy all the supporting mods now, instead of headaches in the long run....need some real world advice thats all.

Car is mainly street, never sees track work, and is on toyo t1rs 235/265, with coilovers and camber bushes for the rear, still a bit of suspension work to do.

Edited by nsta
Link to comment
https://www.sau.com.au/forums/topic/175688-about-to-go-do-the-hks-gt-rs-route/
Share on other sites
PM-R33 Grand Master

PM-R33

Posted
Posted

Im waiting on my GT-RS as we speak (should be here in a week), its a direct bolt on to everything and comes with new lines that you will have to put on. To get the most out of it you will need an aftermarket ECU and bigger injectors (550cc will be enough). Shouldnt need a fuel pressure regulator if you get the bigger injectors but it can help for tuning. Head gasket is not really needed to lower compression untill u start getting near 270-300, even then some people dont go a different head gasket.

Good turbo choice :)

Adriano Grand Master

Adriano

Posted
Posted
Im waiting on my GT-RS as we speak (should be here in a week), its a direct bolt on to everything and comes with new lines that you will have to put on. To get the most out of it you will need an aftermarket ECU and bigger injectors (550cc will be enough). Shouldnt need a fuel pressure regulator if you get the bigger injectors but it can help for tuning. Head gasket is not really needed to lower compression untill u start getting near 270-300, even then some people dont go a different head gasket.

Good turbo choice :)

Agreed, but definately dont get a fuel pressure reg.

Al Grand Master

Al

Posted
Posted

ECU and Injectors are a MUST to get full potential out of the turbo/engine.

The GT-RS kit is made to be a straight bolt on. In the Jap instructions you'll see that it would still bolt on to the std airbox, smic, and ext manifold :thumbsup:.

At a later stage (if you want more power) i also recommend fitting the Tomei Poncams; these sticks work great with the turbo.

Below are a couple of my graphs, but i have the Poncams and extensive head porting (neither are needed, but do produce more power). Ignore the red line, in the graph, as the graph was done as a comparison between two different exhaust systems (red was my previous sys). The blue line was my final tune on 18psi.

post-1811-1183858520_thumb.jpg

post-1811-1183858541_thumb.jpg

Al Grand Master

Al

Posted
Posted

A GT-SS on a rb25det is too small.

The smallest i'd go would be a GT2530, but you'd only get about 210-220rwkw. Responsive as all hell though :thumbsup:

Just to let ppl know: Extensive head porting will introduce a little more lag into the system (about 400rpm)

PM-R33 Grand Master

PM-R33

Posted
Posted
sweet!, let me know how your goes mate, im after the most responsive setup i can get, and i thik the gtrs fits the bill perfect....alright, ill keep the injectors in mind

Yeah no worries dude ill let you know. Ill just be running the standard ECU and standard injectors for now and see how far i can push that setup. If it's not good enough for the time being ill chuck the SAFC on there untill i get some money for a Power FC and 550cc Nismo injectors. Then the fun will begin :P

Adriano Grand Master

Adriano

Posted
Posted
ECU and Injectors are a MUST to get full potential out of the turbo/engine.

The GT-RS kit is made to be a straight bolt on. In the Jap instructions you'll see that it would still bolt on to the std airbox, smic, and ext manifold :P.

At a later stage (if you want more power) i also recommend fitting the Tomei Poncams; these sticks work great with the turbo.

Below are a couple of my graphs, but i have the Poncams and extensive head porting (neither are needed, but do produce more power). Ignore the red line, in the graph, as the graph was done as a comparison between two different exhaust systems (red was my previous sys). The blue line was my final tune on 18psi.

Awesome power curve, congrats dude

Al Grand Master

Al

Posted
Posted
Yeah no worries dude ill let you know. Ill just be running the standard ECU and standard injectors for now and see how far i can push that setup. If it's not good enough for the time being ill chuck the SAFC on there untill i get some money for a Power FC and 550cc Nismo injectors. Then the fun will begin :domokun:

STOP!!!!!!!!

What are you doing man?!?!

Get the ecu first, before the turbo, and run about 12psi on the std turbo.

The ecu will unlock soooo much torque and power, it will feel like a new turbo :thumbsup: It was one of my best upgrades, second only to the turbo, which should be done after the ecu.

You'll also need a new, bigger, fuel pump when you get the turbo; possibly before hand, depending how good/worn your std one is.

Al Grand Master

Al

Posted
Posted
Awesome power curve, congrats dude

Thanks buddy.

Only had it like that for about 5000km before my std bottom end gave up after a track day (low compression in #3: 83psi) :(. But car is only used on weekends(sometimes) and events. Done a couple of motokhanas, cruises and one track day, then oil out the new B&M pod :domokun: . But i do drive it hard at these events :P.

Now rb30det, with GT30R(500hp) (gt-rs too small for the rb30), greddy plenum and a few extra goodies. Only going for about 280-300rwkw, but will hit full boost (20psi) by about 3300rpm and make power till the 8000rpm rev limit :thumbsup:

The GT30R was the smallest recommended turbo for this setup.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...