Jump to content
SAU Community

Recommended Posts

For those of you who are considering the purchase of a Front Mount Intercooler this may be of interest to you.

A friend of mine is organising a bulk buy of Trust Intercooler Kits for $1,650 AUD each. These kits bolt up perfectly without the need to get the hole saw out. The most minor trimming of the rear of the bumper is all that's required in most cases. I fitted mine myself and it was so easy it was laughable.

Kits available for ER34, R33 GTS-T, S13, S14 & S15.

Contact Gary: [email protected]

Link to comment
https://www.sau.com.au/forums/topic/17616-trust-front-mount-intercooler-kits/
Share on other sites

Only the kits I mentioned are on offer at the moment.

The specs of the coolers are something you could find out from anyone who sells Trust ( like Advan ) but I do know that they are aluminium tube and fin style with alloy plumbing ( mine is and all the others I've seen from Trust ).

Just remember, it's from "Trust" so you have to work on the theory that it's going to be as large as is sensible to fit into the respective cars without major surgery.

Send a PM to Gary and he should be able to answer some more of your questions.

mailto:[email protected]

Originally posted by FAT32

These kits bolt up perfectly without the need to get the hole saw out.

Im interested to know how you can say that you dont need a hole saw when these intercooler kits require a hole to be cut in the inner guard near the washer bottle/battery tray depending on wether the car is a R32 or R33. This hole is required to run the piping down to the drivers side of the intercooler.

The trust kits use the factory in inlet hole and outlet hole for the piping, thats why you don't need to cut a hole in the inner guard :)

my trust kit should be arriving anyday now :)

adrian :O

Originally posted by EnricoPalazzo

Nengun has Trust Intercooler Kits on special atm, way cheaper then your price. Check it out!

Way cool ! Thanks, I'll check it out.

The cheaper the better !! :O

hahahahaa you guys would not believe how much i got my Trust V-SPL cooler kit for :P

Blitz, yeah they use factory piping i have been told, but not all off it, only the hot pipe off the turbo apparently? i shall find out and let you all know when mine arrives ;)

adrian :rofl:

Originally posted by EnricoPalazzo

Nengun has Trust Intercooler Kits on special atm, way cheaper then your price. Check it out!

what is their url ?

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...