Jump to content
SAU Community

Recommended Posts

Hi ppls,

Well, due to the great success of the first group buy, and by popular demand, I will open a new group buy for the silicone inlet pipes.

Made from 4 ply silicone and designed as a direct replacement for the stock pipe, these are the perfect remedy for those 'sucky closed under boost' blues.

$135 + $20 delivery and one can be yours.

BLUE or stealth BLACK.

Two models to choose from.....

R32 or R33/R34

They will also fit their Stagea counterparts.

Group buy guidelines.

Payment will be in full prior to order being placed with the supplier.

Manufacture time is 2 weeks from date of order placement, plus a few days in transit.

Group buy will go ahead when I have 15 people on the list.

I will then ask for all monies to be paid.

Group buy will close when all payments are into my account.

People can order during the paying period if they are quick.

So who's in?

When saying 'yes' please indicate the colour you require.

Please note, at this time, I won't be offering the Radiator pipes.... but they may come soon.

R32

1

2

3

4

5

R33/R34

1 khunjeng.....................Black.................PAID

2 Fujiwara......................Blue...................PAID

3 PAV34.........................Black.................PAID

4 Theuan.......................Blue...................PAID

5 Evil34.........................Blue...................PAID

6 NTYSKY.......................Black.................PAID

7 Wogboy......................Blue...................PAID

8 Yo Yo..........................Black.................PAID

9 skylinecouple...............Black.................

10 AFRO.........................Black.................PAID

PS. Check my trader ratings, I'm not running off with your money.

100+ customers can't be wrong.

BASS OUT

post-6399-1184225537_thumb.jpg

Edited by Bass Junky
Link to comment
https://www.sau.com.au/forums/topic/176294-silicone-inlet-pipe-group-buy-2/
Share on other sites

  • Replies 86
  • Created
  • Last Reply

Top Posters In This Topic

Be careful with the radiator hoses as R33 and R34 are different. Only the top hose is the same on both, the lower hose has two different diameters where it comes out from the engine, an R34 is a smaller diameter than an R33.

Quote from other thread from darrinspencer

""

Ok, I fitted mine last night

My car is a series 2 Stagea with a Neo Rb25det and factory airbox.

I have a Apexi turbo, but it is a direct factory replacement, so everything should line up the same.

I had to trim the BOV return line spigots approx 15-20mm and the outlet end onto the turbo approx 15mm to get things to line up. I trimmed the BOV return spigot to the minimum lenght to just enough to get the clamp on.

I have not finish fitting the airbox/airflow meter yet, but had a quick trial fit. The inlet end will need trimming approx 15-25mm aswell.

The extra length is easily trimmed with a sharp packing knife and gives the flexibilty of it fitting to all cars.

Only took 10-15 minutes to trim and work out what was needed.

Overall. I am very happy with the finished product

Well done Bass, thanks.

""

So there you go, easy fitment.

Okay guys, I've decided to get this group buy going at 10 people.

I've managed to negotiate the minimum number from 15 to 10, so let get stuck into it.

Each of you will have a PM, please read it, pay appropriately and we can get underway.

BASS OUT

Oh and good news, these ones wont take as long to get to you as the first group buy, because the manufacturer will have stock this time.

:D

Probably about 2-3 weeks!

Hey guys....

Well this has been the fastest response to a request for payment Evah!

1 khunjeng....................Black..................PAID

2 Fujiwara......................Blue...................PAID

3 PAV34........................Black..................PAID

4 Theuan.......................Blue...................PAID

5 Evil34........................Blue...................PAID

Thanks for being so prompt guys, now the rest of you just need to pay and I'll get things moving.

For anyone readying this thread, you can still get in until the last payment has been made.

Cheers

BASS OUT

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...