Jump to content
SAU Community

Recommended Posts

Hey guys,

Long story short: I own a R32 GTS4 rb20det moderately to highly modified, about 2-3 months ago i damaged the engine, we think its a head gasket but havent pulled it apart yet. I have been more keen to get my RB25det in! So anyway, when i blew the engine a few months back, we rolled it and stored it at a friends place near by. Last night we were finally able to bring it home!!! so happy to see it again!!!!!!!!!!!!!

ANYWAY, the rb25 hasnt been rebuilt or anything it came straight out of a staggy half cut with low K's so im keen to just throw it in. But there is one precaution i would like to take and that is replace the OEM head gasket with a metal one to help prevent blowing another one too soon. This will be done by me and a friend so just wondering what were the 'technical' aspects about this project... ive heard you have to undo the bolts in a certain sequence to prevent bending the head as it comes off? Anyone know this sequence?

Any extra info would help :blink:

Cheeeeers

Link to comment
https://www.sau.com.au/forums/topic/176583-my-baby-is-home/
Share on other sites

cheeers guys! ripped the RB20 out this morning! so now its time to start preping the rb25 for the drop in.

I dont want to push anything over 240rwkw now as i want to keep a bit of reliability/streetability, id be more than happy with the more responsive and torquish power from the 25 after driving the 20. All the parts i have are interchangable between the engines except for: Jun front fed Plenum, custom fuel rail, and GTR injectors. Trying to figure out if i should go stock 25 plenum and pay for extra cooler piping or buy another front fed plenum to fit the 25...

So now its time for my shopping list... Would love for some input. (Trying to keep to a budget and only getting what i NEED for this to work.)

The RB25 shopping list: (So far...)

- Head studs

- 555cc nismo injectors

- Metal head gasket (What size is recommended for say 14-15psi of boost.)

- Gasket kit

- New belts

- New hoses

- Oils and fluids

Edited by zertek
Link to comment
https://www.sau.com.au/forums/topic/176583-my-baby-is-home/#findComment-3230470
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty this is your red flag. In MAP based ECU's the Manifold pressure X RPM calculation is how the engine knows it is actually...running/going through ANY load. You are confusing the term 'base map' with your base VE/Fuel table. When most people say 'base map' they mean the stock entire tune shipped with the ECU, hopefully aimed at a specific car/setup to use as a base for beginning to tune your specific car. Haltech has a lot of documentation (or at least they used to, I expect it to be better now). Read it voraciously.
    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
×
×
  • Create New...