Jump to content
SAU Community

Recommended Posts

Looking into buying a set of G4 coilovers for my 180sx, as these probably best suit my budget. Who has had much expericence with them, and have they had any problems.

ie. a mate of mine done less than 5000km on his set before one started leaking, also i have heard that people have had major trouble when it comes to warrenty when things do go wrong.

Any one have any suggestions about other brands of suspension that are in the same price range, thanks!

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/
Share on other sites

Pretty sure I read on this forum G4's and D2's are the same thing - different colour... apparently both made in China, basic valving and not the best quality...

From what I can gather Tein super streets are comparatively priced...? I also havent heard any complaints about the HSD's :)

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3236105
Share on other sites

A friend has the G4's in his 32.... extremely rough ride.. even with the damper all the way adjusted... worse than my Jap spec Teins which are only height adjustable....

Although.. he has never had any issues with them... possibly he hasn't set his up right though.. wouldn't of thought that they would be that stiff!

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3236202
Share on other sites

So how much are these things? Because from experience I gotta say, if you can hold off another few months and save a bit more money to get a better product its well worth the wait.

100% agreed. These things are basically bottom of the barrel type things, do you really want that for such an important part of the car? And especially when good dampers for not much more.

Edited by salad
Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3237099
Share on other sites

Friend had some g4s.. one shocked leaked from just normal driving under 2 months of use!! WOW..

but they replaced the whole shock for free.. so warranty wise they look after you..

however, they are pretty stiff when driving sydney roads..

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3237562
Share on other sites

HSD, G4, D2 whatever you call it, my advice would be to drive a car with them installed then drive a car with something like bilsteins, or tein mono-flex. then make up your mind. there is a massive difference between them.

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3237585
Share on other sites

they are probably an ordinarily valved shock with very heavy spring rates to control the body movement.

people buy them and equate "Stiff" = "good handling"

Rule of thumb - run the lowest spring rates you can for what you want to do, and get the best shocks to control those springs.

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3237631
Share on other sites

HSD, G4, D2 whatever you call it, my advice would be to drive a car with them installed then drive a car with something like bilsteins, or tein mono-flex. then make up your mind. there is a massive difference between them.

Damn right.

I've had 3 different set ups in my car (88 cefiro). 1st when it came from japan, it has kei office adj coilovers, with 450lb front springs, and 350lb rears, it was stupid, they eventually leaked, so I got them rebuilt. The rebuild had the rear springs go to the front, and I bought some new rear springs. So this gave it 350lb fronts, 200lb rears, and shocks revalved (no longer adjustable) to suit those springs, this was a massive improvement over the kei office orginals.

I then had 3 of those 4 rebuilt shocks die in less than 12months. Which is when Sydney Kid got a call, explained whats good, what isnt and why. I've now got the bilsteins in (with the 350&200lb springs) and the again was MILES better. As in the ride was smoother, the car felt more stable, and its definately quicker around corners.

Seriously, just spend the money once, and buy the good stuff, get spring rates that suits the car. If you dont want roll, get thicker anti sway bars.

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3238248
Share on other sites

I have a set of G4's in my 32 and the only problem I have had is with the supplier screwing me around and giving me the wrong parts etc. The ride isn't too rough (I have 7(f) and 5®) and I really like them. Improved handling alot of adjustment in height and good bang for your buck. It is all well and good for people to pay them out but I find they are doing the job and am quite happy.

My 2 cents anyway.

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3238676
Share on other sites

two things that shit me about them

1/ they f**k up quickly - and need to be replaced, which is a PITA, and just after the warranty expires they die again, so you are stuck with worthless garbage that you can even sell

2/ they are a shit ride - really, for those of you who think they are good - get some decent coilovers in your ride and then say that again - you wont

They have no rebound adjustment, so when you adjust the dampening, you only adjust the bump - and the dampening adjustment only works for 50% of the range

For a few dollars more - HSD are MILES in front, they actually half decent shocks, half decent adjustment, and they will last alot longer than G4 (less headaches, less screwing around replacing under warranty, redo wheel alignment [more cost] etc, etc)

For a few dollars more you can get GAB or Buddy Club - as pointed out, and they are also miles in front of G4/D2 garbage

Or, if you dont want to spend more money, buy a decent shock and spring combo - minimal stuffing around (setting damping and heights) - they bolt in, they work

Most people dont want to, and dont know how to spend the time needed to set up coilovers well - they just want to be able to jump in and drive - if you fall into this category, definately consider a spring/shock combo

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3238812
Share on other sites

leaking, knocking, car feels unstable or gets upset easily when going over bumps, back end feels loose, back end feels skittish, front end feels skittish, front end feels loose, car starts to understeer or oversteer (more than normal) all could be signs of suspension problems.. and more.

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3240720
Share on other sites

I have a set of G4's in my 32 and the only problem I have had is with the supplier screwing me around and giving me the wrong parts etc. The ride isn't too rough (I have 7(f) and 5®) and I really like them. Improved handling alot of adjustment in height and good bang for your buck. It is all well and good for people to pay them out but I find they are doing the job and am quite happy.

My 2 cents anyway.

i second that and i have bin in rides with tien and D1's. tiens where very nice but im still happy with my g4's

Aif

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3252260
Share on other sites

Have had G4's in my S15 for about a year now, they are to stiff for me, and i'm not one to whinge about driveablility and exhaust noise blah blah.

It really does struggle to put the power down on average quality (most) roads. On a nice smooth track I'd imagine they would be fine.

Once I come across some money I will going the SK gear...

Edited by Shane
Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3254216
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...