Jump to content
SAU Community

Recommended Posts

Looking into buying a set of G4 coilovers for my 180sx, as these probably best suit my budget. Who has had much expericence with them, and have they had any problems.

ie. a mate of mine done less than 5000km on his set before one started leaking, also i have heard that people have had major trouble when it comes to warrenty when things do go wrong.

Any one have any suggestions about other brands of suspension that are in the same price range, thanks!

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/
Share on other sites

Pretty sure I read on this forum G4's and D2's are the same thing - different colour... apparently both made in China, basic valving and not the best quality...

From what I can gather Tein super streets are comparatively priced...? I also havent heard any complaints about the HSD's :)

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3236105
Share on other sites

A friend has the G4's in his 32.... extremely rough ride.. even with the damper all the way adjusted... worse than my Jap spec Teins which are only height adjustable....

Although.. he has never had any issues with them... possibly he hasn't set his up right though.. wouldn't of thought that they would be that stiff!

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3236202
Share on other sites

So how much are these things? Because from experience I gotta say, if you can hold off another few months and save a bit more money to get a better product its well worth the wait.

100% agreed. These things are basically bottom of the barrel type things, do you really want that for such an important part of the car? And especially when good dampers for not much more.

Edited by salad
Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3237099
Share on other sites

Friend had some g4s.. one shocked leaked from just normal driving under 2 months of use!! WOW..

but they replaced the whole shock for free.. so warranty wise they look after you..

however, they are pretty stiff when driving sydney roads..

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3237562
Share on other sites

HSD, G4, D2 whatever you call it, my advice would be to drive a car with them installed then drive a car with something like bilsteins, or tein mono-flex. then make up your mind. there is a massive difference between them.

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3237585
Share on other sites

they are probably an ordinarily valved shock with very heavy spring rates to control the body movement.

people buy them and equate "Stiff" = "good handling"

Rule of thumb - run the lowest spring rates you can for what you want to do, and get the best shocks to control those springs.

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3237631
Share on other sites

HSD, G4, D2 whatever you call it, my advice would be to drive a car with them installed then drive a car with something like bilsteins, or tein mono-flex. then make up your mind. there is a massive difference between them.

Damn right.

I've had 3 different set ups in my car (88 cefiro). 1st when it came from japan, it has kei office adj coilovers, with 450lb front springs, and 350lb rears, it was stupid, they eventually leaked, so I got them rebuilt. The rebuild had the rear springs go to the front, and I bought some new rear springs. So this gave it 350lb fronts, 200lb rears, and shocks revalved (no longer adjustable) to suit those springs, this was a massive improvement over the kei office orginals.

I then had 3 of those 4 rebuilt shocks die in less than 12months. Which is when Sydney Kid got a call, explained whats good, what isnt and why. I've now got the bilsteins in (with the 350&200lb springs) and the again was MILES better. As in the ride was smoother, the car felt more stable, and its definately quicker around corners.

Seriously, just spend the money once, and buy the good stuff, get spring rates that suits the car. If you dont want roll, get thicker anti sway bars.

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3238248
Share on other sites

I have a set of G4's in my 32 and the only problem I have had is with the supplier screwing me around and giving me the wrong parts etc. The ride isn't too rough (I have 7(f) and 5®) and I really like them. Improved handling alot of adjustment in height and good bang for your buck. It is all well and good for people to pay them out but I find they are doing the job and am quite happy.

My 2 cents anyway.

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3238676
Share on other sites

two things that shit me about them

1/ they f**k up quickly - and need to be replaced, which is a PITA, and just after the warranty expires they die again, so you are stuck with worthless garbage that you can even sell

2/ they are a shit ride - really, for those of you who think they are good - get some decent coilovers in your ride and then say that again - you wont

They have no rebound adjustment, so when you adjust the dampening, you only adjust the bump - and the dampening adjustment only works for 50% of the range

For a few dollars more - HSD are MILES in front, they actually half decent shocks, half decent adjustment, and they will last alot longer than G4 (less headaches, less screwing around replacing under warranty, redo wheel alignment [more cost] etc, etc)

For a few dollars more you can get GAB or Buddy Club - as pointed out, and they are also miles in front of G4/D2 garbage

Or, if you dont want to spend more money, buy a decent shock and spring combo - minimal stuffing around (setting damping and heights) - they bolt in, they work

Most people dont want to, and dont know how to spend the time needed to set up coilovers well - they just want to be able to jump in and drive - if you fall into this category, definately consider a spring/shock combo

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3238812
Share on other sites

leaking, knocking, car feels unstable or gets upset easily when going over bumps, back end feels loose, back end feels skittish, front end feels skittish, front end feels loose, car starts to understeer or oversteer (more than normal) all could be signs of suspension problems.. and more.

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3240720
Share on other sites

I have a set of G4's in my 32 and the only problem I have had is with the supplier screwing me around and giving me the wrong parts etc. The ride isn't too rough (I have 7(f) and 5®) and I really like them. Improved handling alot of adjustment in height and good bang for your buck. It is all well and good for people to pay them out but I find they are doing the job and am quite happy.

My 2 cents anyway.

i second that and i have bin in rides with tien and D1's. tiens where very nice but im still happy with my g4's

Aif

Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3252260
Share on other sites

Have had G4's in my S15 for about a year now, they are to stiff for me, and i'm not one to whinge about driveablility and exhaust noise blah blah.

It really does struggle to put the power down on average quality (most) roads. On a nice smooth track I'd imagine they would be fine.

Once I come across some money I will going the SK gear...

Edited by Shane
Link to comment
https://www.sau.com.au/forums/topic/176930-g4-coilovers/#findComment-3254216
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...