Jump to content
SAU Community

Auto Window Winder

tdan

By tdan,
in Car Audio & Electrical

 Share

Recommended Posts

tdan Contributor

tdan

Posted
Posted (edited)

I just bought an auto window winder of E-bay for $20, and I want to install it. Anyone have any idea on where to get the wires from for the connections? I figured out which wires I do need for the install, but, I don't want to mount everything in the door, TOO BULKY!!! I won't have any problems installing the unit, cos all the wires are colour coded. It's just basically getting to the wires under the dash, or somewhere else.

Can anyone help me as to the location for the window wires?

Thanks for your help out there!!!

PLEASE GUYS. I'M SURE THERE IS SOMEONE OUT THERE WHO CAN HELP ME.

Edited by tdan
Link to comment
https://www.sau.com.au/forums/topic/176947-auto-window-winder/
Share on other sites
  • 1 year later...
tdan Contributor

tdan

Posted
  • Author
Posted

Hi again... I have figured out how to get to the wires and how to get them through the door and the a-pillar. I was just wondering if there is anyone out there who can give me advice on which wires off the door switch do I connect the module to? I have attempted to use a test light and multimeter to get voltage from which wire does which, but the tests have been inconclusive and giving me mixed signals.

So, if there is anyone who could give me the advice, or tell me how to do it, that would be very much appreciated.

Cheers heaps.

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

with fiddling - yes. depends on the roof and how it actually works. if I can automate a convertible silvia to fully close the roof and lock it self - a sunroof will be a walk in teh park. are you electronics minded?

tdan Contributor

tdan

Posted
  • Author
Posted
drivers door for the up wires.

poke and prod for the correct wires. nissan change them to much.

Thanks for that. I decided to just bite the bullet, use a test light and a sewing pin and that gave me the best results.

If anyone else would like assistance with this, PM me and I will try to help you out as best I can.

krzysiu Grand Master

krzysiu

Posted
Posted
with fiddling - yes. depends on the roof and how it actually works. if I can automate a convertible silvia to fully close the roof and lock it self - a sunroof will be a walk in teh park. are you electronics minded?

Tell you the truth a convertable would be easier to automate than a sunroof as a sunroof has tilt and slide. There will need to be a signal given whether to close it by sliding, or just from the tilt. I was going to get this auto wind kit from ebay but i called a few places and they have quoted me an arm and a leg to get it put in place and even more to get the sunroof to work.

Only thing i got wired to close when i arm my car is the side mirrors which fold automatically.

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

nah most of them are transisitor based anyway. for me its a case of two delayed signals to close it fully. same idea to open it.

nissan drop tops are a pain to automate. too many lockouts to defeat to make the thing do as you want.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...