Jump to content
SAU Community

Recommended Posts

Ive been considering getting one of these guys for a while, but I have no idea whats decent and whats not.

Have been considering the "Navigator 3000" from Road Angel, purely because I can get it cheap (well I think so anyways) - $325 - $350.

Link - http://www.roadangel.com.au/

Is this a good unit and a good deal?? Or would you recommend something else??

Your input would be great.

Thanks,

BEC

Link to comment
https://www.sau.com.au/forums/topic/177875-gps-devices/
Share on other sites

I have the Road Angel 6000... awesome to use.. maps are uploaded free whenever they are updated.. only the rd sense side of it is a subscription... thinks its $9 per month... but the first 6 months are free....

Link to comment
https://www.sau.com.au/forums/topic/177875-gps-devices/#findComment-3246968
Share on other sites

TomTom.

I've used Navigator, Destinator and TomTom...

TomTom > Destinator > Navigator.

Garmin is meant to be ok as well, but go the TomTom. Keep in mind to buy updated maps cost a few hundred.... but I've heard TomTom can be acquired if you know where to look :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/177875-gps-devices/#findComment-3247392
Share on other sites

Tom Tom's are very easy to use and have the best screen layout while navigating, but it missing one cruicial setting (for me anyway)

You cant tell it NOT to take dirt/ unsealed roads, coming back from NSW it wanted to take us though dirt roads in woop-woop (not happening in the hot rod we were in). It didnt even say that they were dirt roads, i recognised some of the road names close to out destination.

The Navman on the otherhand has an avoid dirt roads setting.

Another annoying item (maybe caused by me not knowing how to operate it, but if so its not very intuitive); i couldnt get it to add towns as waypoint. Say you wanted to go to Echuca via Healsville, it wanted you type in street number, name etc; things that arent necessary, i didnt know any street names to type in anyway. I just wanted it to take me via Healsville, not stop at someones place!

I havent tried this on the Navman yet so i dont know if that works for my uses.

And they are very acurate as a speedo, better thatn most car speedos. Try it and compare it to the detectors on the Geelong or Hume Hwys

Link to comment
https://www.sau.com.au/forums/topic/177875-gps-devices/#findComment-3248395
Share on other sites

Tom Tom's are very easy to use and have the best screen layout while navigating, but it missing one cruicial setting (for me anyway)

You cant tell it NOT to take dirt/ unsealed roads, coming back from NSW it wanted to take us though dirt roads in woop-woop (not happening in the hot rod we were in). It didnt even say that they were dirt roads, i recognised some of the road names close to out destination.

The Navman on the otherhand has an avoid dirt roads setting.

Another annoying item (maybe caused by me not knowing how to operate it, but if so its not very intuitive); i couldnt get it to add towns as waypoint. Say you wanted to go to Echuca via Healsville, it wanted you type in street number, name etc; things that arent necessary, i didnt know any street names to type in anyway. I just wanted it to take me via Healsville, not stop at someones place!

I havent tried this on the Navman yet so i dont know if that works for my uses.

And they are very acurate as a speedo, better thatn most car speedos. Try it and compare it to the detectors on the Geelong or Hume Hwys

Shane..I owe u $20 from the drag day - pm me u details!

I have used a navman and Garmin on my yacht as a speedo, to compare the actual speed and VMG (which is another speed reading for yacht racing) againsta my actual instruments. It read clsoe if not the same and they cost like $5000 for all the bits and pieces.

In the car I use the TomTom 710 as stated before. Yeah unsealed roads anrt the best however I have never needed to use that feture. The big touch screen is really good when driving and very easy to read. My wife can use it (thats why I bought it) and she reckons its ace, press the "home button" and it directs you straight home. I just had a look in it I notice key points of intrest are CHadstone, Chapel Street, High Point and the QV CarPark. LOL sorry at home beating of..

Link to comment
https://www.sau.com.au/forums/topic/177875-gps-devices/#findComment-3248410
Share on other sites

Bec/Adz - You can borrow my TomTom ONE if you'd like to see what it's like.

Very easy to use (MUCH better than the OEM system in most cars, especially Bentley) and pretty accurate.

Is here at the office now - but I can drop it into MSAC in the morning if that is useful.

Link to comment
https://www.sau.com.au/forums/topic/177875-gps-devices/#findComment-3249086
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...