Jump to content
SAU Community

Recommended Posts

Hi,

One of my parkers has died. I had a quick look to see how difficult it would be and it looks like a bitch of a job. There doesn't seem to be anything regarding how to change parkers on the forum...

Has anyone done this before? It's a S1 GTS-T. The side in question is the same side as the turbo...

Link to comment
https://www.sau.com.au/forums/topic/17895-changing-the-parkers-on-an-r33/
Share on other sites

yeah u can do it, but im constantly tinkering with them so i always find it easier to just unbolt the and fiddle here and there. like i had the indicators goin in the parker bulb case for a while, but it was fast flickering (small bulbs) and you couldnt see it, so i changed it back. ive got cut wires here and there hehe

Well, I changed it for the princely sum of $1.50... Undid the power cable and gave it a small twist with the needle nose pliers. Then it just unscrewed :-) Same thing in reverse to put it back. I don't think they'd ever been changed before 'cause there was that much crap and dust in there... It's amazing the things that never have been changed before... My spare tyre is the original japanese one (although it -should- have been replaced), and it's still got it's dye on the tread.. Never been used :-)

  • 8 months later...

Ok, this might be a dumb question but how do you change the parker bulbs in that are in the actual headlights? (not the ones on the corners).

I tried twisting the grey plug under the main circular cap on the back of the headlight but it wouldn't move and I really don't want to get the pliers onto it unless I know that I'm twisting the right thing the right way!

Oh, and yes I know you can't pass a roadworthy with these parker bulbs in.

Ok, after sticking my head under the car today I managed to disconect the -'ve wire that was running to the extra parking lights in all 4 of my headlights.

Couldn't actually pull the bulbs out as the assembly for them (which is located on the bottom of the headlights) is a kinda rubber plug sealed with something that feels like silicon...so it may actually be a custom job.

Tomorrow morning I'll reconnect one side and post pics :-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...