Jump to content
SAU Community

Recommended Posts

Nothing was really said that is incriminating.

Well nothing to really worry about anyhow. I'm sure a cop would be able to distinguish between the thin crappy paper they use to the 80gsm stuff that we use. It would never look the same unless you were really good and most of us probably arnt' :)

I remember seeing an Avtar of the owners car.. It was a dark greyish colour with black wheels and the rim towards the outside was a darkish red colour.

He burned left around the round about (after he pulled in front of me) and I saw that it was running quite rich.. Not lots but like a small skinny stream of black smoke (fuel) from the exhaust.

I think he saw me give it a bit up flagstaff hill as the turbo's do love the hills :)

  • 2 weeks later...
Guest wilco

I get pulled over by cops around Golden Groive regularly, they seem to like turning their lights on, and then driving right on by when you pull over, it has happened to me at least 3 or 4 times along the Golden Way. In one week I was pulled over and id'd three times coming away from there, supposedly due to a spat of car's like mine being stolen.

Chris32, which printer do you work for, or are you your own operation?

NO, the cop would not give me the list he had on him. Dont know if you can get it from motor reg or not. Its hard too know what you can and cant do if we havent got a list. We need a list of ADR's for each car.

This is the closest I have found of anything on the net guidelining vehicle modification, it doesn't cover much but there is a bit of useful info in there, it is for NSW but should pretty much be the same for anywhere else.

It would be great if we would be able to compile a list of defectable mods so we have some idea of what we can be done for if we're caught

http://www.rta.nsw.gov.au/registration/dow...loads/vsi06.pdf

i got defected last night .. but it was only an official warning luckily cause one of my head light globes blew up .. i only noticed it 2 days ago and i'm going today to fix it up ... there was no need to do any paper work but the ****er of a pig decided he had to ... could of just told me my globe was screwed and let me go .. but no he said .. "this is just an official warning so if u get pulled over again they will know that u have been warned!!! and you will get defected!!" ... screw them .. as if u would drive a decent car and not get little things like this fixed up ... oh well at least he didn't defect me for anything else ... the first thing he asked was .. is it a turbo?? this is the second time i've been pulled over .. the first time the cop pulled me over because my passenger didn't have a seat belt .. he got away with it ... and also that time the pig asked ... is it twin turbo?? LOL whats it with these cops and turbos?? can't they just do some reading so they would know??? they should get of their asses and do some research ...

Dude, (oops sorry, kanga:D) he actually gave you a permit to have a bust light bulb, cos if another copper had pulled you over, you could have waved the bit of paper in his face and would have been on your way. If you got pulled over again, with nothing to show, you could have copped a regency insp if he/she was being a fark head.

I think your best go out and buy a lotto ticket:) Pulled over twice, not defected, and both times let off with a warning.

well i asked him .. are u going to defect me?? and he said .. i'm thinking about it ... what a d1ck hahaha ... anyways the light bulbs gone and i couldn't get it out and it broke so the bulb is still in there .. how to get it out?? i just put in a new one just then ...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...