Jump to content
SAU Community

Recommended Posts

use the hi octane exchange sump. way better than a puny 800ml extra. ive seen bearings spin on gtrs wityh the extension. simply not enough oil.

the sump i made holds around 8.5 litres to the high mark on the stick. no surge at all as yat.

you can't use both. but for me unless you have a high volume oil pump (like tomei, trust etc) I would use the baffles.

simply because to fit the extension your sump needs to be cut in half and I have seen some welded on extensions that were done pretty poorly. and it's very important that the pick-up is sitting at the right depth inside the sump. also they hang quite low, it shouldn't be a problem, but if for instance you spun off the track backawards over a ripple strip (happend to me!) it would be in danger of getting collected. plus the extra capacity adds a lot of $$ to your oil change if you are using oil like motul chrono (which you should be).

so I reckon unless you really need extra capacity, just use the tomei baffles.

...also they hang quite low, it shouldn't be a problem, but if for instance you spun off the track backawards over a ripple strip (happend to me!) it would be in danger of getting collected.....

That's what worries me about the extensions.

well...i've had both on my race car and have seen some minor surge using the tomei style baffles - never had any sign of trouble with the trust extended sump.

but keep in mind this is on excellent tyres with great traction, right on the limit - I don't think most cars would see any difference.

re clearance I've run the extended sump on plenty of tracks including some offs and not hit it......but thats not to say it could never happen - the trust sump definately hangs lower than the subframe

well...i've had both on my race car and have seen some minor surge using the tomei style baffles - never had any sign of trouble with the trust extended sump.

but keep in mind this is on excellent tyres with great traction, right on the limit - I don't think most cars would see any difference.

re clearance I've run the extended sump on plenty of tracks including some offs and not hit it......but thats not to say it could never happen - the trust sump definately hangs lower than the subframe

Thanks for that, I do intend to run the car at the track so good to hear from someone who has tried both in those conditions

use the hi octane exchange sump. way better than a puny 800ml extra. ive seen bearings spin on gtrs wityh the extension. simply not enough oil.

the sump i made holds around 8.5 litres to the high mark on the stick. no surge at all as yat.

I'd say that has more to do with the build and not overfilling than not enough in an extended sump.

well I'm convinced. both dave and duncan I know have thought about this a lot. so I'd go with their idea. especially if you are using a nismo oil pump (not nissan N1, but actual nismo pump) as they flow a fair bit more oil than a stock pump at any given pressure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...