Jump to content
SAU Community

Recommended Posts

hi i hav a skyline r33 gtst auto, my mods are turboback exhaust, greddy fmic, blitz podfilter, greddy emanage, and dual stage boost controller, i recently put the e-manage in n got it tuned with new spark plugs. it dynoed at 194 kilwatts at 14psi, but as u can c in da readout ders a massive power loss, and den it shoots back up, my mechanic said ur cam timing is mostly likely out, i just wanted to know that when the cam timing is fixed if that is the problem, if i will gain more kilawatts, and secondly with the mods i have, is the kilwatts matching the mods i have?

post-35445-1186494110_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/179974-plz-look-at-my-dyno-read-out/
Share on other sites

looks to me that he didnt touch anything on the map before 5000rpm (i.e. r&r looks like its still there).

timing is adjustable with the emanage so that was purely an excuse to cover for his shit tune.

did you get an AFR readout too?

I know its quite obviouse on the dyno graph that theres a big flat spot at 4000rpm, but have you noticed this before?

It may just be in this guys tune and hes looking to get a few more $$$$$$ from you, I've seen this happen before.

my guess is that your coils or plugs aren't coping with the boost and it is missfiring, then coming good up top. what gap are the new plugs, and what sort are they?

when i get a hold of ucd15r33's dyno graph i will post it. it did the same thing. there is a big dip in i where it misfired then came good, and his doesn't have rich and retard.

looks to me that its too consistent to be a coil/spark issue. and it handles it well after what looks to be 5000rpm.

if it was a spark issue then that would've been the excuse his tuner gave him, not the timing one.

im going to go out on a limb and say that the tuner didnt know how to tune out the R&R, so he said something was wrong with his timing.

ive seen better tuning on a safc. scratch that... ive seen better curves on a standard ecu!

if i was you i'd go back and make him fix it. if he cant then make sure you get your money back.

Edited by SECUR1TY

maybe thats when vtek y0! is kicking in? ;)

if not then i agree with the below

im going to go out on a limb and say that the tuner didnt know how to tune out the R&R, so he said something was wrong with his timing.

if i was you i'd go back and make him fix it. if he cant then make sure you get your money back.

i'd say timing, boost controller and rich and retard....

seems like boost is spiking hard and then the car goes into R&R.... dunno if its coilpacks cos theres no way it'd hit 194 kws with faulty pack.

so i agree with VB

new controller,

new tuner

good luck, let us know how it goes.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...