Jump to content
SAU Community

Recommended Posts

hi i hav a skyline r33 gtst auto, my mods are turboback exhaust, greddy fmic, blitz podfilter, greddy emanage, and dual stage boost controller, i recently put the e-manage in n got it tuned with new spark plugs. it dynoed at 194 kilwatts at 14psi, but as u can c in da readout ders a massive power loss, and den it shoots back up, my mechanic said ur cam timing is mostly likely out, i just wanted to know that when the cam timing is fixed if that is the problem, if i will gain more kilawatts, and secondly with the mods i have, is the kilwatts matching the mods i have?

post-35445-1186494110_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/179974-plz-look-at-my-dyno-read-out/
Share on other sites

looks to me that he didnt touch anything on the map before 5000rpm (i.e. r&r looks like its still there).

timing is adjustable with the emanage so that was purely an excuse to cover for his shit tune.

did you get an AFR readout too?

I know its quite obviouse on the dyno graph that theres a big flat spot at 4000rpm, but have you noticed this before?

It may just be in this guys tune and hes looking to get a few more $$$$$$ from you, I've seen this happen before.

my guess is that your coils or plugs aren't coping with the boost and it is missfiring, then coming good up top. what gap are the new plugs, and what sort are they?

when i get a hold of ucd15r33's dyno graph i will post it. it did the same thing. there is a big dip in i where it misfired then came good, and his doesn't have rich and retard.

looks to me that its too consistent to be a coil/spark issue. and it handles it well after what looks to be 5000rpm.

if it was a spark issue then that would've been the excuse his tuner gave him, not the timing one.

im going to go out on a limb and say that the tuner didnt know how to tune out the R&R, so he said something was wrong with his timing.

ive seen better tuning on a safc. scratch that... ive seen better curves on a standard ecu!

if i was you i'd go back and make him fix it. if he cant then make sure you get your money back.

Edited by SECUR1TY

maybe thats when vtek y0! is kicking in? ;)

if not then i agree with the below

im going to go out on a limb and say that the tuner didnt know how to tune out the R&R, so he said something was wrong with his timing.

if i was you i'd go back and make him fix it. if he cant then make sure you get your money back.

i'd say timing, boost controller and rich and retard....

seems like boost is spiking hard and then the car goes into R&R.... dunno if its coilpacks cos theres no way it'd hit 194 kws with faulty pack.

so i agree with VB

new controller,

new tuner

good luck, let us know how it goes.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...