Jump to content
SAU Community

Recommended Posts

OK. As I approach my pride and joy (32 GTR) Wednesday afternoon, I look in the drivers side door and notice something very strange, my steering wheel is missing... Confused, I try to make sense of it. The first thought is someone has been in my car? After unlocking the door (they were thoughtful enough to lock the car up) and jumping in I quickly assess the situation and realise that nothing else has been stolen or damaged.

I take a closer look at the steering column and notice that in the process of taking the wheel which was a well used Imola they had actually snapped the steering shaft. I then think their motives must have been revenge as the wheel was hardly worth it and that the damage caused would be more expensive. I jump out of the car and assess the externals, engine bay, boot etc. Nothing was touched, infact there were absolutely no signs of forced entry.

Bummed out as you can well imagine I arrange a tow truck and the driver advices me that I am very lucky as they tried to steal the car and snapped the shaft in the process of breaking the steering lock (done with a good amound of force). This happened in the Constitution Ave car park opposite the Convention centre. In this case I was exceptionally lucky that the shaft snapped before the steering lock as I have no doubt the car would have been gone if it hadn't.

The car is in the process of being repaired and I am getting a satellite tracking security system installed. It isn't worth the risk.

Coincidently, in Sundays Canberra Times there is an article about car theft in Canberra. Statistically, the worst areas not surprisingly are the city, Kingston, Phillip and I think Belconnen.

My advice, insurance, well installed security system and a bit of vigilence.

Link to comment
https://www.sau.com.au/forums/topic/180468-attempted-theft-of-my-baby/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Embarressingly I didn't have an alarm which made me an easy target.

I did a lot of research into alarms and yes many of the systems are very good but it comes down to how well it is fitted. Canberra isn't known for its quality alarm fitters either.

Recent studies indicated that a professional thief are able to bypass most alarms and immobilisers in an average of 20 seconds. This is because of the quick and cheap installations. From the information I gathered a good fitter needs at least half a day to properly fit the system to make it difficult for a thief to bypass.

Sorry to hear that.

Installing alarm is highly recommended! I can't stress that enough.

It's not only deterrant for thefts, and it also saves from hit & run incidents.

I was at the Fyshwick Officeworks carpark, doing late night stationary shopping. I hear the alarm go off in my Echo, while I was at the checkout. Some Officeworks staff & I went outside to have a look, a van reversed into the car and just about to drive off. He could have since there was no one around until the alarm went off. Luckily he saw us and stopped, and we took his details.

Interesting point there and very lucky on your behalf. With so many false alarms these days it is good to see that people still respond to an alarm.

It was acutally suggested to me to have the alarm installed in the cabin because even if bystanders ignore an alarm sounding, it is unlikely a thief will or can ignore 100 decibels ringing in his or her ears for very long.

that is no good. i have had a car stolen before and i learned my lesson.

I now have top of the line alarm with 4 points of immobilization alarm hidden, siren hidden, kill switch, ear bleeding screamers, insurance and a license to beat car thieves. hehe...

the bastards deserve being caught and taught a lesson they will NEVER forget.

It was acutally suggested to me to have the alarm installed in the cabin because even if bystanders ignore an alarm sounding, it is unlikely a thief will or can ignore 100 decibels ringing in his or her ears for very long.

I remember someone mentioning this isn't actually legal or something? Can someone confirm?

Would anyone know of decent alarm fitter around here? Or know how to configure these things?

I thought BDL Car Stereo in Belconnen did a pretty good job on the one they did for me a few years ago

This happened in the Constitution Ave car park opposite the Convention centre.

The car is in the process of being repaired and I am getting a satellite tracking security system installed. It isn't worth the risk.

Yep my commo was pinched from there, real dumb thieves. An immobiliser would have prevented them stealing it.

Do some research into the tracking systems, I think you will find none of them work in the ACT. I know a few people in the ACT willing to spend big $ on alarm systems but looked into satellite systems and passed them up due to their ineffectiveness in the ACT.

I used to work for an auto electrical wholesaler and we supplied allot of the auto elec worshops around Canberra, the best places to go get a good alarm installed are by far Lonsdale Auto Electrics in Braddon (very switched on auto elec's) and Tuggeranong Auto Electrics (also very good) I wouldnt go anywhere else.

However, an alarm and immobiliser will only protect you so much, a pro theif will get through an alarm in no time, your best bet is a hidden kill switch somewhere in the car that only you know about, Ive heard of some very creative ones such as pushing the ashtray in (push button switch behind it), these simple switches are just as effective (if not more) as an immobiliser.

I also have spoken to a few vehicle recovery cops and they have all told me that the best defense against car theives is a club lock... I have been told by numerous cops that the first question they ask the owner when a car is found after being stolen is did it have a Club lock? The answer is ALWAYS no.

But I think that the best defense is DONT park anywhere that you dont 100% trust (like anywhere in Civic).

Havent exactly heard great things about Tuggeranong auto electrics, majorly stuffed up someones alarm install on this forum. I wouldn't use em.

Well, thats your choice.

I know the owner personally and he is a great guy and a very good auto elec.

Sometimes accidents happen and you cant generalise because of one incident, after dealing with them for over 2 and a half years I know for a fact that they are a really proffesional bunch of guys.

But.....You cant believe everything you read in forums can you.

I am not sure how effective club locks are either. I remember watching one of those sensationalistic news programs and using brute force a thief can break even the best ones.

I do like the idea of a hidden kill switch though. The only way to steal the car besides locating the switch is on the back of a truck...

Well, thats your choice.

I know the owner personally and he is a great guy and a very good auto elec.

Sometimes accidents happen and you cant generalise because of one incident, after dealing with them for over 2 and a half years I know for a fact that they are a really proffesional bunch of guys.

But.....You cant believe everything you read in forums can you.

Thats true, for every good experience theres always a bad one, could say that for all the electricians around here. Just wanted to say that people have had bad experiences with them as well as good. Just I wouldn't use them thats all.

My missus came back to her car last night to find that someone(people) had tried to nick it, broken window, popped bonnet etc, they didnt get very far though. no internal damage and nothing missing so like WTF?

$110 for a new quarter window fitted.

Im def putting in a decent alarm/immob for her and doing it right. I put my Viper in my 200 and made damn sure it was as well hidden and hard to bypass as possible.

I know the owner personally and he is a great guy and a very good auto elec.

Sometimes accidents happen and you cant generalise because of one incident, after dealing with them for over 2 and a half years I know for a fact that they are a really proffesional bunch of guys.

I have also had very good experiences with Tuggeranong Auto Electrics, in the 7 years I have been using them, they have only made one (although intentions were good ) genuine mistake and when I spoke to them about it, they rectified it straight away, fully refunded my money and were admirable about the whole encounter.

I think communication plays a large part in resolving issues like this, and they were prepared to listen and respond. I'm prepared to use them again because I know if anything goes wrong, they won't close the door on me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...