Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

What like a gti golf?

Id prob go the new volvo over the XR5 tho. Just a little bit more different, little more sleeper appeal.

I'd compare it to something like an EVO VI with full exhaust, its very very close to the EVO VI in term of response.

i rather a TypeR civic though handling wise.

Its has masive brake and handle alright too, though the TYPE R cost much more isn't it?

that's cause evey man and his dog with an evo or wrx will rape it for a year or 2 then sell it before something breaks, like the gearbox, which they seem to be really good at breaking. i know a wrx that is on it's 3rd box.

wrx's and xr6t's are 2 cars i wouldn't own second hand, unless the first owner was an old fart.

yeah i would take the mazda or ford over the astra. i don't like the styling. but both the ford and the holden have the issue of the wiper and indicator stalks being on the opposite sides, which pisses me off no end.

yeah i would take the mazda or ford over the astra. i don't like the styling. but both the ford and the holden have the issue of the wiper and indicator stalks being on the opposite sides, which pisses me off no end.

Yeah they are nice, but after sitting in both the MPS and the XR5, they left me feeling abit cold, especially the MPS. There wasnt really that much that made it look different to the normal Mazda 3. At least the XR5 has real nice recaro seats in it. But I guess its personal preference.

yeah i would take the mazda or ford over the astra. i don't like the styling. but both the ford and the holden have the issue of the wiper and indicator stalks being on the opposite sides, which pisses me off no end.

so you basing a good portion of your decision on the placement of the steering column configuration?

... i like it

I'd compare it to something like an EVO VI with full exhaust, its very very close to the EVO VI in term of response.

Its has masive brake and handle alright too, though the TYPE R cost much more isn't it?

In relation to the first point, I'm guessing you have driven both to be able to make this statement. It seems unlikely to me though. The Ford as tested by Motor did a 7.4 secs to 100km/h and 15.2 over the quarter. These don't even come close to that of an Evo. I understand that the evo is 4wd which helps with the launch though not that much.

The new Civic Type R is $39,990 before on road costs.

All these new turbo hot hatches feel fast to those who have a skyline where the real power kicks in high up in the rev range. They come across as being responsive and quite punchy. For instance the Ford's peak turbo kicks in at 1,600 revs and is a not to be sneezed at 320nm. Compare that to the stock R33 GTST which had around 270nm (or 290nm depending on where you look) at 4,800 rpm from memory.

I drove the Mazda 3 MPS and was very impressed by the acceleration. I certainly didn't walk away wanting one though. Firstly the styling is a bit bland inside and out. Secondly there was no sense of occasion. The car didn't seem pure or have spirit.

No doubt these cars are pretty quick and would probably beat my R33 turbo around a track though I will save my money for something else.

Edited by Smurf
it takes bigger balls and more skill to drive a fwd car hard. nothing like having to fight the steering wheel in a straight line as well as round corners.

You think so? I find it the opposite. I haven't driven a super high powered FWD yet and had to deal with major torque steer in a straight line, but then a high powered RWD will start stepping the tail out if you put too much power down and it starts to spin.

A FWD car is generally predictable. It will almost always understeer. And that's always easier to drive around, because all you have to do is modify your pedal inputs instead of having to steering and throttle modulation....and if you exceed the grip limits (no matter for what reason) the car will do the same thing.

In relation to the first point, I'm guessing you have driven both to be able to make this statement. It seems unlikely to me though. The Ford as tested by Motor did a 7.4 secs to 100km/h and 15.2 over the quarter. These don't even come close to that of an Evo. I understand that the evo is 4wd which helps with the launch though not that much.

The new Civic Type R is $39,990 before on road costs.

All these new turbo hot hatches feel fast to those who have a skyline where the real power kicks in high up in the rev range. They come across as being responsive and quite punchy. For instance the Ford's peak turbo kicks in at 1,600 revs and is a not to be sneezed at 320nm. Compare that to the stock R33 GTST which had around 270nm (or 290nm depending on where you look) at 4,800 rpm from memory.

I drove the Mazda 3 MPS and was very impressed by the acceleration. I certainly didn't walk away wanting one though. Firstly the styling is a bit bland inside and out. Secondly there was no sense of occasion. The car didn't seem pure or have spirit.

No doubt these cars are pretty quick and would probably beat my R33 turbo around a track though I will save my money for something else.

Kind of make sense mate BUT,

Evo VI regardless still a secondhand car, if not has been trashed badly from Japan so the condition will never be the same where the XR5's test is latest and realistic. Offcourse Evo will be faster but i said the responsive almost felt the same.

I've never actually get to driven the MPS but Mazda has good reputation too so i won't doubt that it won't be good either.

As for skylines, i think i know them pretty well, in fact i LOVE it :(, i had a 13s R33gtst for over 3years, then an 11sec R32 gtr for 3 years as well and both time are on street tires too. Nothing beat a straight SIX in top end.

For some reason, i still don't believe that the XR5 clock a 15.2 over the quater because my little Starlet Gt hit a 15.8 with just cat back zorst and the XR5 definately felt much faster than my Starlet, just a thought though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on the purpose of the car, and how much more fabbing you want to do, and what clearances you have, you could look to raise the motor, which will raise the front diff up. Likely would mean altering the chassis rails etc etc, hence the more fab work you'd need to do. However, this can create issues, not just in clearance with everything fitting under the bonnet, but you've also raised a LOT of weight up in the car, and this will DEFINITELY alter handling characteristics (But, so will how much weight you've already added to the front end). You'll also have to deal with the fact the gearbox to rear diff is now out of alignment too for the tail shaft, and alter the angle of the diff, or deal with a bit of potential vibration. Raising the motor an inch up, is effectively the same as making the whole car sit higher by not lowering it as far. So one inch higher motor, theoretically means you can drop the car an extra inch lower, and maintain the same angles in the CVs. Again, depends on the purpose of the car. If it's a just cruiser on the street car, maybe won't be an issue. If it's meant to be a time attack car, I can see you not wanting to raise the motor. This is just for you to ponder as an idea.
    • Have you not seen geospy.ai? It can now give GPS co ords to within a metre from a photo, even if it's a random photo you take inside. Supposedly at the moment only the government/law enforcement has access to that... Supposedly...
    • I've got the rear ones, they're certainly beefy. I need to take them to my driveshaft guru to check over, he's very fussy about the quality of components so I'll let you know if they are made of cheese by a blind man.   Are you in Australia? A mate just had a set of EN26 shafts made for his K20 Lotus by our fabricator which were quite cheap (compared to Driveshaft Shop) so if you can procure the CV's and draw what you need he'd make them for ~$800 for the pair.
    • Had I known the diff between R32 and R33 suspension I would have R33 suspension. That ship has sailed so I'm doing my best to replicate a drop spindle without spending $4k on a Billet one.
    • OEM suspension starts to bind as soon as the car gets away from stock height. I locked in the caster and camber before cutting off the kingpin. I then let the upright down in a natural (unbound) state before re-attaching it. Now it moves freely in bump and droop relative to the new ride height. My plan is to add GKTech arms before the car is finished so I can dial camber and caster further. It will be fine. This isn't rocket science. Caster looks good, camber is good, upper arm doesn't cause crazy gain and it is now closer to the stock angle and bump steer checks out. Send it.
×
×
  • Create New...