Jump to content
SAU Community

Recommended Posts

hey guys, dont you just hate it when you are driving through a car park and there is a smart ass that just decides to walk in front of ya and doesnt get out of ya way. as soon as i pass em i wanna give him/her a lil punnishment hehe. so i am asking are you able to have some type of purge without having to use nitrous??

Link to comment
https://www.sau.com.au/forums/topic/181338-purge/
Share on other sites

Get caught with your nitrous kit attached on the road here in WA and recieve a fine and a red sticker.

I can't see a purge kit scaring many people. Have you seen one activate it's definately not the 4th of july. Try a set of truck air horns or a starter pistol plumbed into a solenoid if you want to be a weirdo.

Link to comment
https://www.sau.com.au/forums/topic/181338-purge/#findComment-3295675
Share on other sites

Get a CO2 Purge Kit on the front of your intercooler, that way you *might* scare parking lot wallabies and it will also serve a purpose (condenses the air going into the intercooler).

Or if you really want to scare them plow right through them!

Link to comment
https://www.sau.com.au/forums/topic/181338-purge/#findComment-3295715
Share on other sites

Bee*r Rev Limiter + Lotsa revs = smart ass needing new underwear.

what he said... FTMFW

had this guy go to us at the lights "your back wheels are going ot fall off, im like na thats the major negative camber and he disagreed and thought we knew what he was on about" he got highest stage bee*R with his window open.

he well shat.

Link to comment
https://www.sau.com.au/forums/topic/181338-purge/#findComment-3295834
Share on other sites

One of these suckers will do the trick

http://www.youtube.com/watch?v=FONe--EjCpc

HAHAHAHAHA that is f***n funny, yeah id say go with an air horn. I bought one from motorquipe in carousel for 25 bucks. . . . Just shake, aim and press the button. . . .Very loud and cheap to buy, and fun to scare people haha

Edited by Daniel R32
Link to comment
https://www.sau.com.au/forums/topic/181338-purge/#findComment-3295965
Share on other sites

kekeke when i had bee*r i did that to some lady walkin on the road blocking the way when i got a chance to go pass her i revved it up and loaded past her and then bang bang bang she shat herself

mmm good times good times :P

Link to comment
https://www.sau.com.au/forums/topic/181338-purge/#findComment-3296014
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I think he was only proposing to use the wire, not the sender. Simply because it runs from the right place to the right place. Personally, I wouldn't hack up the factory wiring like that. I'd just lay in the Defi loom.
    • From memory it wasn't too hard to simply see which wire ran where when you plug that in. Unfortunately also from memory the OEM sender does not use the same configuration 99.9% of gauges run. So in other words if you connect the signal wire that was running to the OEM gauge to your DEFI gauge you might find your oil reads at 200C or some other incorrect value. I remember having the same line of thought and then running new wires/senders to match the gauges I have. The pinout is available in the R34 workshop manual.
    • Does anyone on here know which wire on the GTT triple gauge pod harness is for the oil temp gauge? my sensor works fine but I upgraded the gauges to DEFI advance. And if I can simply piggyback off the oem oil temp wire to the Defi oil temp sensor wire that would make life so much easier. 
    • Even face her a wash now that’s it worth more than my house
    • This was what I was invisioning, or Pete cutting a beer can up and hose clamping it around the catch can! Ha ha ha
×
×
  • Create New...