Jump to content
SAU Community

What'll It Do - 200rw 33?

vault13

By vault13,
in Engines & Forced Induction

 Share

Recommended Posts

vault13 Enthusiast

vault13

Posted
Posted (edited)

Ok so I have searched and couldn't find anything so don't bash me!

I'd like to know what a 33 in VERY GOOD condition should do, ie 1/4 mile and 0 - 100, with stock turbo maxed out, ie ~200rw.

I saw a good thread with stock times of nissan/toyota/commos for a comparison, can't find it.

In comparison to stock vehicles, I would assume it shouuld match a soarer, 300zx, probably not a supra?

Edited by vault13
Link to comment
https://www.sau.com.au/forums/topic/181963-whatll-it-do-200rw-33/
Share on other sites
abu Grand Master

abu

Posted
Posted (edited)

What other mods?

An R33 with fuel pump, cooler, turbo back exhaust, button clutch and standard ECU making 205rwkw ran a 13.1 on street tires.

LTHLRB I think where his plates.

Depends on the driver, depends on your tires etc..

There are a million different variables that could effect that time.

Edited by abu
mesmerized Mentor

mesmerized

Posted
Posted (edited)

http://www.importdriver.com.au/Coupe_Targa.htm

if this chart is incorrect, apologies in advance. (the prices are way off, the web page is a little old, but the other figures seem fairly accurate)

EDIT - plus i believe these times are based on jap spec 100 RON fuel

Edited by into oblivion
vault13 Enthusiast

vault13

Posted
  • Author
Posted (edited)

Ok assuming all the related mods

pump

fmic

boost control

turbo back zorst

clutch

safc or tuned ecu

street tires

no pfc or injectors just stock turbo, no suspension mods

Hmmm so according to the times into oblivion posted, this should trounce a stock 300zx in the 1/4 and come pretty close to stock 33 GTR, probably not 32.

What about 0-100 time, anyone know?

What other mods?

An R33 with fuel pump, cooler, turbo back exhaust, button clutch and standard ECU making 205rwkw ran a 13.1 on street tires.

LTHLRB I think where his plates.

Depends on the driver, depends on your tires etc..

There are a million different variables that could effect that time.

Edited by vault13
Nismo_God Veteran

Nismo_God

Posted
Posted

200kw doing a 12.8 on street tyres???

my run was almost perfect......seen as i can only get 0.1 closer using drag radials.....had a 60ft of 2.025 and 105mph

the car is stock except those listed as i did them myself and bought it completely stock....had 144kw when i first got it.....

Spook's_Skyline Mentor

Spook's_Skyline

Posted
Posted
the car is stock except those listed as i did them myself and bought it completely stock....had 144kw when i first got it.....

thats some super skyline you got, i havent heard of anyone else making 200rwkw with a stock ecu

mesmerized Mentor

mesmerized

Posted
Posted (edited)

^^ mine's running 202rwkw @11psi. only mods are zorst, pod, intercooler, manual boost controller. was running 188rwkw on standard boost. i've seen a few other people pushin 200 with standard ecu,so it does happen

haven't taken her down the 1/4 yet though sorry vault13

Edited by into oblivion
siddr20 Grand Master

siddr20

Posted
Posted (edited)

i guess 2rismo has some expeirence in that area.. as in at the drags..

so im sure he would have mastered it.. if he did 12.80

i did 14 flat, with just full exhaust and no other mods (18s on front lol.. 17 rears.. 18s werent mine.. was borrowin rims, as mine had no thread on front)

Edited by siddr20

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...