Jump to content
SAU Community

Recommended Posts

Hi guys,

I have a question for those that have track experience and know what they are talking about -

Recently I had a track day at wakefield park in my 32 Gts-t and by the end of the day (after pushing the car hard for 60 odd laps) the inside of the front right tyre (i.e. the inside tyre for most corners) had become very worn. I was wondering if anyone could explain this?

The car has stock suspension and when pushed hard into a corner understeered a fair bit (normal I suppose - probably poor driving on my behalf at times :P ) but I have a theory that the tyre could have worn as a result of being dragged across the road during these moments (with very little weight on it obviously). What would be the possible handling upgrades to combat the problem? (I know of SK's handling upgrade package but thats a few $$$ i will need to consider for a while).

Thanks

Link to comment
https://www.sau.com.au/forums/topic/182335-race-track-handling-help/
Share on other sites

very unusual to have more wear on the inside wheel than the outside - when it is understeering its the outside tyre that gets punished.

do you know what the wheel alignment is like on the front, in particular toe?

Still.....60 laps on road tyres is a good day out - they overheat pretty early when pushed and wear very poorly after only a few laps

Thanks Duncan - Yeah, don't have figures on toe at the moment - I have the equipment here to do it just haven't had a chance yet.

I thought the tyres (apart from the unusual wear) held up really well, though a second set of wheels and some race rubber is definately a priority for next time.

Anyone have Ideas what a good time in an (almost) stock 32 Gts-t would be around wakie? I got down to a 1:17.9 hand timed with 2 people in the car.

Btw - I had a look at your car at the SAU Show n shine and it was a very impressive machine - nicely presented too

Edited by Chris-06R

1:17 is pretty respectable in a near stock 32 with street tyres and stock suspension. Actually, i'd say very respectable.

I'm with duncan, i'd have expected your passenger side front outside edge to be toast with the sort of plough understeer nissan engineered into the front end of a 32 :)

lol and I'm with bhdave 1.17 is pretty respectible on street tyres - there is probably only a second or 2 more in it. Maybe time for some good semi slicks they should get you down to 1.12-1.13

Anyone have Ideas what a good time in an (almost) stock 32 Gts-t would be around wakie? I got down to a 1:17.9 hand timed with 2 people in the car.

The best i could get out of my R32 GTSt was 1:13.4. That was with a HKS Cat back exhaust. HKS FMIC, 14psi and Yoko DNA tyres which were 2nd hand from a place in Granville but still better then the Falken 326 i used to run. And i had the Whiteline works package. I think if i had nto modified the car i would have been able to get into the very high 1:12s ... maybe. My first go out in the car as imported with cat back exhaust and AVS 17" wheels and 10psi was 1:18.6 or something. (Std suspension) so you are doing better then i was

Edit...to clarify, when i say modify the car i mean from the road tyres, whiteline suspension and std turbo/ecu etc. I would have maybe been able to improve fromt eh 1:13 to a high 1:12 with more laps. Not do a 1:12 with std suspension etc. No way the little girl could have mustered that sort of pace :P

I dunno about that roy, I'm fairly sure I was close to the cars limit - there might be a second or two from someone who really knows what they are doing but I highly doubt there a 1:13s in my car the way it is...

I'm sure Tyres could definately improve it by more than a couple of seconds, and apart from the FMIC you had my mods are the same, so you've given me something to aim for :)

Still a 1:13.4 is super quick in an almost stock gts-t :P

I dunno about that roy, I'm fairly sure I was close to the cars limit - there might be a second or two from someone who really knows what they are doing but I highly doubt there a 1:13s in my car the way it is...

I'm sure Tyres could definately improve it by more than a couple of seconds, and apart from the FMIC you had my mods are the same, so you've given me something to aim for :)

Still a 1:13.4 is super quick in an almost stock gts-t :P

When i did the 1:13.4 i had the Whiteline works suspension package with a pretty good wheel alighment, cat back exhaust and fmic with 14psi. It also had a clutch, so whilst not heavily modified it has too many mods to be calling it almost stock :D

Prior to the suspension upgrade i was in the 1:18s etc. But i only ever did 2 track days before throwing the suspension in it and then the FMIC. The car stayed in that guise for about 3 years and i got my times down to from the previous 1:18s to the 1:13s.

I often wonder how much quicker i would have been able to go just with more laps with the stock suspension? I dont know, maybe a high 1:16??? I think the car would have been capable of a high 1:12 with road tyres and std turbo etc etc just in learning more. But i got impatient and threw more mods at it...so i will never know :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...