Jump to content
SAU Community

Recommended Posts

Your best off sending him a pm, but I must advise he has spent a pretty penny as his car is a drag car these days...

But he did have it road registered and road worthy for a while until he got really serious about drag racing...

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

SR can run that standard internals no sweat.. even on 1 bar of boost and by 3700rpm :blink:

u knw u want to be the 2nd line with a SR20 in it..

So can an RB25

Many many RB25s have made around 300rwkw on stock bottom ends, I however like to be safe hence why I have an engine built to handle 800hp when I only intended to run around 400hp

And Yes I know SRs can pull similar numbers they are however also unsafe, I like my car to be well with in limits and assuming our friend here has already popped one engine I am sure he would rather be on the safe side from now on

and sif second skyline to have an SR

25/30..going to do it, do it right. You will love it.

keep your head. Sell your bottom end for a few hundred.

Pick up a rb30 for 100 bux. cheaper can be found easy enough.

depending on power, forged spool rods for like 800-900bux should pull it up or can use standards, forged pistons for like 1350.

new bearings maybe 120, thats mains and big ends. headgasket for like 200 or less.

Just machining($1000) and assembly(fark knows, never paid anyone to assemble a motor before) required.

Exhaust will need to be modified, and ic piping, if using std inlet you might need to drop the crossmember down a little with some spacers or raise the bonnet.

There is a little bit of work involved, but if your not afraid to turn some spanners and get your hands dirty, not only can you save some money you might learn something.

Edited by r33_racer
25/30..going to do it, do it right. You will love it.

keep your head. Sell your bottom end for a few hundred.

Pick up a rb30 for 100 bux. cheaper can be found easy enough.

depending on power, forged spool rods for like 800-900bux should pull it up or can use standards, forged pistons for like 1350.

new bearings maybe 120, thats mains and big ends. headgasket for like 200 or less.

Just machining($1000) and assembly(fark knows, never paid anyone to assemble a motor before) required.

Exhaust will need to be modified, and ic piping, if using std inlet you might need to drop the crossmember down a little with some spacers or raise the bonnet.

There is a little bit of work involved, but if your not afraid to turn some spanners and get your hands dirty, not only can you save some money you might learn something.

Hell yes now thats a plan!!!

man i'm still considering sr20 conversion.... but also like the rb25/30 idea

i hope your joking?

i didnt think having a slow sr powered skyline is cool. Unless slow cars with small engines are considered cool nowadays?

... :D tsk tsk another SR hater..

man i'm still considering sr20 conversion.... but also like the rb25/30 idea

yeah.. well ur an individual (ricer) and im sure that if i was a show car or something wanting to be different i wouldnt want to have the run of a mill RB25 in my sweet lookin skyline. i would go for something else.

personally if i was in brentons position and i had money i would go a different engine.. prob a 1UZ or 2UZ perhaps a JZ engine but a SR20 would be a nice conversion over the Rb20 25 26 and 25/30s thats been done..to death.. too many lines out ther and nothing stands out unless u have 750hp

an SR half cut is far less than a RB25 cut in similar condition. u cna use the RB25 auto if u want. which is slighty strongr than the SR i would presume.

brentons car is unique so im sure a conversion thats been done less would attract far more votes at shows than a 25/30 with 500ponies..

Hell yes now thats a plan!!!

i hope your joking?

read up i think my opinion is valid

... :( tsk tsk another SR hater..

yeah.. well ur an individual (ricer) and im sure that if i was a show car or something wanting to be different i wouldnt want to have the run of a mill RB25 in my sweet lookin skyline. i would go for something else.

personally if i was in brentons position and i had money i would go a different engine.. prob a 1UZ or 2UZ perhaps a JZ engine but a SR20 would be a nice conversion over the Rb20 25 26 and 25/30s thats been done..to death.. too many lines out ther and nothing stands out unless u have 750hp

an SR half cut is far less than a RB25 cut in similar condition. u cna use the RB25 auto if u want. which is slighty strongr than the SR i would presume.

brentons car is unique so im sure a conversion thats been done less would attract far more votes at shows than a 25/30 with 500ponies..

read up i think my opinion is valid

SRs are actaully as expensive if not more so than a 25

ok i would agree that the sr is a great motor if not one of the best 4cyl engines around tons of support and knowledge out there great little bit of gear,

BUT THERE IS NO WAY I WOULD EVER CONSIDER PUTTING ONE IN MY SKYLINE!

SR conversions are for old school datto's carollas gemi's etc. or of-course the silvia/180 lineup

ok i would agree that the sr is a great motor if not one of the best 4cyl engines around tons of support and knowledge out there great little bit of gear,

BUT THERE IS NO WAY I WOULD EVER CONSIDER PUTTING ONE IN MY SKYLINE!

SR conversions are for old school datto's carollas gemi's etc. or of-course the silvia/180 lineup

x2, Imagine the devaluation when you tried to sell your car. For sale....Series 2 skyline with 4 banger. Like, WTF. ;)

yeah spoke to dan on the phone just waitin for him to email the quote

Sorry mate, I have re-sent the email. Probably best to discuss in person as customisation can be done.

Also - who told you $4k for second hand - it's more like $2k

Hey man.

How would you go with a r34 gt-t neo engine.Would it fit??As i think i can sell you one cheap complete. :)

pm. me if you are interested!! :)

yes the neo will fit. but the neo aint much different from a normal RB25. not really an upgrade imo

dude. i got one sitting at my house. take me 2 days to do the conversion.. but that engine is going into the S14 which we inspect this weekend.. he'll even have tip tronic. lol

5k S14 FTW :)

x2, Imagine the devaluation when you tried to sell your car. For sale....Series 2 skyline with 4 banger. Like, WTF. :D

actually noel u couldnt be more wrong.. have a look. RB25 180sx are going for 17k for a 90 model.. and SR ceffys go for more than the RB ones do. and im sure a skyline with a SR20 in it would fetch more than a RB25.. why cause people like individuality.. like ur ugly ass chromies.. :)

cars with engine swaps nearly always fetch more. unless its a molested converted skyrine vs a complete stock low kms model.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...