Jump to content
SAU Community

Recommended Posts

You will find that your lights are crazed ( they have tiny little cracks on the lens from exposure to the sun) nothing short of changing them can fix it . Put your lights on at night and look in the lens you will the tiny little cracks . Polishing them fixes it for a little while, well makes them look better, not realy fixes them.

Mine are pretty bad on my R33, so i was going to replace them, but everywhere i inquire they all want anywhere from 350 to 450 per head light.

Is there anywhere I can get a set from that is not going to hurt my hip pocket to much. 700-900 for a pair of second hand oem headlights is a bit steep for me.....unless im cheap :D

I see some on US Ebay second hand ones that start low, but unsure if they will comply with AU standards?

Is it possible just to replace the headlight lenses wit new ones?? I know they're sealed on,

but are there places that heat off the old one and can fit a new one on? Can you buy just the lenses from nissan?

S2 Headlights new from nissan are $500+ each

Mine are pretty bad on my R33, so i was going to replace them, but everywhere i inquire they all want anywhere from 350 to 450 per head light.

Is there anywhere I can get a set from that is not going to hurt my hip pocket to much. 700-900 for a pair of second hand oem headlights is a bit steep for me.....unless im cheap :D

I see some on US Ebay second hand ones that start low, but unsure if they will comply with AU standards?

I have a good pair, no fogging and nothing broken you can have them for $350.

Get some really fine sandpaper, and some warm soapy water, and sand the headlights until you get a milky residue.

You can repeat again with a more corse paper, but still really fine.

Then cut and polish it with some good polish.

Has worked for me before, so give that a go.

Takes away the hazey yellow layer, and makes them pretty damn clear.

My xenons have gas marks on the inside of the lens, and from what i've heard the lights are totally sealed so apart from using a heat gun or something to open em up anyone else opened R34 len's ot cleaning the inside of them?

I use Meguires PlastX. It's a clear plastic polish specially designed for faded plastic and works pretty well. A few people i know thought i replaced the headlight. For $18 you cant really fault it except that you have to re-apply it every 1-2 months.

Edited by quiksta

lol 18 $$$$$$$$$$$$$

i just use 20 cents worth of polish and a bit of wax and it last for 2 months

has anyone else tried the wetrub with 1500 like mentioned earlier?

there is a new 29 $ dollar headlight kit i seen in supercheap but cant rem the company?

I know for the supras theres a mob that makes glass lenses for them. You can unseal the standard ones with a heat gun or oven or something, then replace the lens with a glass one and never worry about fading.

Any one made like a replacement glass lens for the skyline head lights instead of plastic??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...