Jump to content
SAU Community

Two.06l Update (twoogle)

Swiper the Fox

By Swiper the Fox,
in Engines & Forced Induction

 Share

Recommended Posts

Swiper the Fox Grand Master

Swiper the Fox

Posted
  • Author
Posted

Ran it tonight..went well only ran it on low boost (21psi) to "shake it down"

I finally reached my 20th run tonight so still very much a novice.

So here's what happened...

1st pass 1.60 60' short shifted all gears and ran 10.7 @ 130 MPH

2nd pass 1.49 60' gave it a bit more in each gear and ran 10.4 @ 134 MPH

3rd pass got hassled at the start line about only having 1 arm restraint and forgot to switch it back into 4WD (this was my last run as they would not allow another pass without both arm restraints fitted). Launched it off the limiter and lit it up spinning the rears (2WD) past 60' (1.90). But really put the foot down in 3rd and went through the traps for a new MPH PB of 137 MPH. Across the line both belts (power steering and alternator) came off and tore a huge hole in my top radiator hose. Thus ending the fun for the night.

When its fully tuned with full boost and a driver with a bit more experience this things gonna be awesome.

The car now weighs 3030lbs or 1375kg...but, im still over 100kg.

  • Replies 682
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Swiper the Fox Grand Master

Swiper the Fox

Posted
  • Author
Posted
Nice MPH and car weight, you must be stoked.

Chris, even when i had busted the radiator hose and the night was over for the car i a had a smile on my face and was very impressed with the potential of the car.

Yes i was "stoked" :thumbsup:

Swiper the Fox Grand Master

Swiper the Fox

Posted
  • Author
Posted
Chris, even when i had busted the radiator hose and the night was over for the car i a had a smile on my face and was very impressed with the potential of the car.

Yes i was "stoked" :thumbsup:

well done Pauly. Pond and I are proud of you and Twoogle. :worship: Next time I will be able to come and cheer you on.

Stace xx

Swiper the Fox Grand Master

Swiper the Fox

Posted
  • Author
Posted
Congratulations, sounds like its going to be a winner!

RH9 club?

Thats the idea...9's on radials.

no one's done it B4 on low mounts...let alone with synchro box and a Power FC.

We still are yet to connect the Nitrous set-up as well.

Im very happy with the progress so far.

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted

Very nice!!!!

Who said the power fc is a crappy computer ? :thumbsup: are you running AFM's ? or map sensor version?

Hope you crack the 9's without the cheating gas.. Will be very impressive when you do.

Angus Smart Grand Master

Angus Smart

Posted
Posted
Thats the idea...9's on radials.

no one's done it B4 on low mounts...let alone with synchro box and a Power FC.

We still are yet to connect the Nitrous set-up as well.

Im very happy with the progress so far.

and here i was thinking rh9 had to include twin low mounts...

thats awesome!

whens the next outing?

Swiper the Fox Grand Master

Swiper the Fox

Posted
  • Author
Posted
and here i was thinking rh9 had to include twin low mounts...

thats awesome!

whens the next outing?

Running AFM version of Power FC

Looking to run at a private track hire on Saturday.

Swiper the Fox Grand Master

Swiper the Fox

Posted
  • Author
Posted
in this thread http://www.skylinesaustralia.com/forums/in...howtopic=185614 you said

you said you had a SM4 plug and play with MAP sensor..

different cars I guess.

I said "yes we have one"

but...not installed yet

Swiper the Fox Grand Master

Swiper the Fox

Posted
  • Author
Posted
this car goes back a long way that i can remember. Good to see its still going well.

Its an oldie but a goodie.

Car was originally a 1st Anniversary wedding present back in 2001.

1st anniversary present is traditionally paper...Stace got paper...rego paper.

Swiper the Fox Grand Master

Swiper the Fox

Posted
  • Author
Posted

some data on the 10.4 run...the g-tech was not calibrated correctly so the ET's a little off (0.2secs) but the MPH was spot on

med_gallery_23582_772_49076.jpg

as you can see above, the shift point was set to 9000rpm...i didn't see or activate the shift light for the middle of the run and shifted 1-2 at 8400rpm and 2-3 at 8600rpm

EDIT: just replay'd the run and the shift light only came on going across the line (top of 3rd)

the graph below is speed vs time

med_gallery_23582_772_89277.jpg

the car does not accelerate for 0.4secs on the 1-2 change and 0.5 on the 2-3 change, much improvement is to be had there. Very lazy changes and need to rev the car a little harder through the gears.

EDIT: be kind with your comments 2rismo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Dose Pipe Sutututu
      Blue slip

      By Dose Pipe Sutututu · Posted

      Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Stringycheese
      Blue slip

      By Stringycheese · Posted

      Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • Duncan
      Blue slip

      By Duncan · Posted

      You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • Duncan
      Ethanol Content Sensor - Always at 11%?

      By Duncan · Posted

      yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
×
×
  • Create New...