Jump to content
SAU Community

Recommended Posts

i thought u said somewhere u had a t62 to go on it?

took ur time paul, fingers crossed for 8's when its ready :thumbsup:

just got home.. Yes Twoogle is alive once more! New engine sounds beutifull. :P this car.

  • Replies 682
  • Created
  • Last Reply

Top Posters In This Topic

i thought u said somewhere u had a t62 to go on it?

took ur time paul, fingers crossed for 8's when its ready :D

well its a bit of a hybrid actually...HKST51R housings upgraded to T62 spec...108mm compressor. So it looks like a T51R but goes like a 62. 1200ps.

it means nothing...

our number plate reads TWO.06L...meaning two point six litre.

some people when making up custom plates use a 6 as a G

my mate one day was looking at the plate and asked us "what does twoogl mean"?

we had a laugh and explained to him that it meant 2.6litre...and that the 6 was not meant to be a G but actually a 6...

he said nah stuff it im now gonna call it "twoogle"

this name stuck and has grown to even been included in the drag records lists and in magazine articles

its weird how some nicknames evolve and stick

so thats how the car got stuck with such a silly nickname

Nice work cant w8 to see this best run down the strip. how much power you hoping to have in it now.

need 900hp at the treads to run the 8.90 im aiming for.

the turbo should provide the power...if not ill give it a spray. :D

Just found this thread today also. Twoogle was actually an inspiration to stick with the twins for my 32 and hence the GTR-S's on it now. you defo had the sort of torque i'll be looking for when mines finally finished. You ready to cough up those cam specs yet. :geek: haha. Still interested to see how you go with the T51r though.

My Friend and tuner that owns the workshop I use up here in townsville is building a 26/30 running a brand new HKS t51r spl thats going into a 180 sx so interested to see what sort of power can be made from the big singles.

Good luck Paul and keep the updates coming.

Just found this thread today also. Twoogle was actually an inspiration to stick with the twins for my 32 and hence the GTR-S's on it now. you defo had the sort of torque i'll be looking for when mines finally finished. You ready to cough up those cam specs yet. :) haha. Still interested to see how you go with the T51r though.

My Friend and tuner that owns the workshop I use up here in townsville is building a 26/30 running a brand new HKS t51r spl thats going into a 180 sx so interested to see what sort of power can be made from the big singles.

Good luck Paul and keep the updates coming.

We got the torque curve even flatter with the final tune using Sonoco. The option to upgrade to this new set-up at no cost was too hard to pass up, but i will always be a fan of the twin low-mounts.

The cams we used on the low mount set-up were big JUN's... :geek:

We got the torque curve even flatter with the final tune using Sonoco. The option to upgrade to this new set-up at no cost was too hard to pass up, but i will always be a fan of the twin low-mounts.

The cams we used on the low mount set-up were big JUN's... :geek:

Humm big JUNs. That helps....haha. Well I've bought a pair of tomei 10.25 lift 260s but i also have a 10.25, 270 exhaust to try as well. What do you reckon? On the right track at all to make these hks's work well?

We got the torque curve even flatter with the final tune using Sonoco. The option to upgrade to this new set-up at no cost was too hard to pass up, but i will always be a fan of the twin low-mounts.

The cams we used on the low mount set-up were big JUN's... :geek:

what did the cam doctor say on them 272 11.35's?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...