Jump to content
SAU Community

Recommended Posts

Call ABS at Springwood, Dan (3lit3 32) works there and he knows his skylines!

Plus it is a place that specialises in clutches and brakes!

good to know i didnt realise thats where he was - just down the road from me!

Thanks for the input guys ! Much appreciated ! :P

Does anyone used this clutch before ? Any comment on it..

post-12776-1188890178_thumb.jpg

hahah em....your game thats all i can say, if you want to have fun and one calf bigger then the other.

for a street car, kinda silly.

i would look at a exedy heavy duty organic or heavy duty semi solid cushion ceramic centre.

orc apparently do some good ones too.

do you value your gearbox! :P

and the health of your neck!!

but as shane says...you could put a cup of concrete with it and harden the f**k up.

but we dont listen the shane.

www.option1garage.com.au

Give them a go...Heard good things.

very good blokes. :P

Call ABS at Springwood, Dan (3lit3 32) works there and he knows his skylines!

Plus it is a place that specialises in clutches and brakes!

dans good. ABS deal with brakes and clutches for ther bread and butter why go anywher else.

apart from Jim Berry.?

do you value your gearbox! :P

haha harden up fellas.. nothing wrong with a stiff clutch..

and as if thats gonna shred a R34 box.

hahah em....your game thats all i can say, if you want to have fun and one calf bigger then the other.

for a street car, kinda silly.

i would look at a exedy heavy duty organic or heavy duty semi solid cushion ceramic centre.

orc apparently do some good ones too.

Thanks for the advice.. I was gona get ORC clutch ...but found out that ORC clutch are push type only for R34 and a conversion kit needed which i don't really wana drill some holes in my gear box..

do you value your gearbox! ;)

off course i do and i value my neck as well.... hahaha :laughing-smiley-014: i guess this clutch is not suitable for me then..

haha harden up fellas.. nothing wrong with a stiff clutch..

and as if thats gonna shred a R34 box.

that's what i'm worry about.. :)

you wont break the gearbox through just having a hard clutch like you say, but if you drive it everyday and everywhere then the wear and tear on the clutch itself will ruin it. Button clutches arent designed for everyday driving, they fail under slipping forces.

for a track car there is nothing better then a button ceramic, but way better getting a heavy duty organic for road driving, or a twin plate organic, if you want something heavier.

you wont break the gearbox through just having a hard clutch like you say, but if you drive it everyday and everywhere then the wear and tear on the clutch itself will ruin it. Button clutches arent designed for everyday driving, they fail under slipping forces.

for a track car there is nothing better then a button ceramic, but way better getting a heavy duty organic for road driving, or a twin plate organic, if you want something heavier.

basically.. for street when u need to ride the clutch occasionally. u want a full face organic. perhaps a ceramic. or multi.

for track with quick shifting and no need for riding and want to limit/eliminate slippage a button/puck or multi would do the trick..

i do like the exeddy HD full face organics. thats what i used in the RB sil and s14a uses one too.

but apparently ther is a difference between the HD aussie made and jap made. i like the feel of the jap one better

Give Brad at G&A mechanical a call hes in sumner park i get all the work done on my 32 done with him, and never had a problem. He put a HKS tripple plate into mine.

Cheers

ur signature gives u away. how much did u pay for it.?

Don't mean to hijack but couldn't justify making my own thread to ask this. Where should I get my FMIC installed (Brisbane - southside preferrably)? And how much would this cost?

I've also got an exhaust I want to get installed which I was going to get done at Right Price Exhausts (got my WRX exhaust done there and they did a good enough job / price). I'd consider getting it done at the same place as my FMIC though to save some dollars. Although - how hard would it be to do it myself? Worth doing to save the $$$?

Thanks.

Don't mean to hijack but couldn't justify making my own thread to ask this. Where should I get my FMIC installed (Brisbane - southside preferrably)? And how much would this cost?

I've also got an exhaust I want to get installed which I was going to get done at Right Price Exhausts (got my WRX exhaust done there and they did a good enough job / price). I'd consider getting it done at the same place as my FMIC though to save some dollars. Although - how hard would it be to do it myself? Worth doing to save the $$$?

Thanks.

You can DIY if you get the right FMIC.. or ask marki to give u a hand.. :laughing-smiley-014: depands on how much you wana spend.. PM me for details if you want more details .. what sort of car u got ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...