Jump to content
SAU Community

Recommended Posts

come on guys and girls lets get this little project off the ground all you people been asking and looking for a dayz bar here is your chance thinking maybee get num plate removed too just a mockup in paint

post-26949-1189849473_thumb.jpg

post-26949-1189849662_thumb.jpg

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

COME ON GUYS. I would love a dollar for everyone who has asked about getting a dayz bar for the series 2.The more that jump in on this the cheaper it will be.I cant afford one just yet but i am willing to put in to at least get the moulds made.Im sure a few others could do the same at least.after all we are all in here to help the fellow waggoners.Any money put in to getting the moulds made will be taken off the purchace price when u do buy one so its not a waste of your hard earned dollars.Regards mike......................................ps here is the link..................http://www.skylinesaustralia.com/forums/index.php?showtopic=184871

post-26949-1190483239_thumb.jpg

post-26949-1190483295_thumb.jpg

COME ON GUYS. I would love a dollar for everyone who has asked about getting a dayz bar for the series 2.The more that jump in on this the cheaper it will be.I cant afford one just yet but i am willing to put in to at least get the moulds made.Im sure a few others could do the same at least.after all we are all in here to help the fellow waggoners.Any money put in to getting the moulds made will be taken off the purchace price when u do buy one so its not a waste of your hard earned dollars.Regards mike......................................ps here is the link..................http://www.skylinesaustralia.com/forums/index.php?showtopic=184871

ok guys next option is to look for a cheaper alternative as i said before i will put some cash for the moulds even tho i cant aford the bar just yet.if a few of us did the same at least the end cost would come down and we would be part owners in the moulds.just a thaught i mean what do you guys want a lot of people were asking about them but nobody prepared to do anything about it .the other option is to import your own which i estimated 700 aud plus paint so even at the price from the group buy you are in front.

hmmm - I am not sure if the dayz front bar is all that great... I am about to get my car (about a week or so off if all goes well) and it has the full dayz kit - but I have seen a silver one with a more - streamline aerodynamic looking kit

mine:

45002568lf_149.jpg

45002568n4_566.jpg

the silver one:

1.jpg

2.jpg

I am also in SA so can't help to much as you guys are all in NSW.

Wow, disappear for a week and someone else is posting pics of my car on the site! :laughing-smiley-014::)

On topic, I personally have no idea what kit it is that's on my car but I have a sneaking suspicion that it's a Dolphin kit.

Ahh yerp. stole it for $10,800 ex tires/rego incl. compliance. :D

Detail shots of the wheels show them to be genuine Work Emotion rollers - worth a pretty penny apparently.

Car got loaded onto the boat Saturday just gone so i'm currently waiting on the call from Customs in about 1-2 weeks.

you can add at least another $2,500 to that price then to cover:

$462 for tyres

$1000 for unkowns

$180 + for stamp duty on first reg

$180 for 3 months rego

Possibly some extra $$ for trucking any non-standard parts down separate to the car...

A few hundred to get stock parts hired for taking over the pits after compliance unless you have your own or get it complied in the same state. (wheels, exhaust, suspension etc)

But still very nice car - to bad it is only series I and not the SII 200+ KW neo engine!

Rule out standard parts fees and you've got me, Got a mate who owns 4 Stags as parts mules. ;)

So far i've worked out where it's going to cost but not how much yet...

Customs broker/shipping fees

Compliance - Powerplay quoted me 3200 (not sure if tires are in the price)

Rego costs/taxes

What have I forgotten?

we are so offtopic here but...

I always allow $600 to $1000 for body damage touch ups - trucking and shipping are nasty things to do to a car with a kit (even without my last R33 cost be $700 to repair damage caused during shipping)

Then maybe $200 to $600 for mechanical work to get it standard - if you can't do it yourself - I have my car - but with the kit fitted it is just to low with the stock suspension - So I am going to have to refit the adjustable TEIN suspension that came with the car - and raise them.

But first I spent three days reconditioning them as they where rusty and the collars on 3 of them where ceased.

Then I have to refit the front bar and most likely take off the side skirts to get it through regency - along with taking off my BOV and swapping my R33 standard parts in.

I also need to work out why my horn does not work?

Also after regency - I will have to refit the BOV, the side skirts, the 18" rims, my turbo gauge, and my HID headlights, might lower her a little again! ;)

Bloody compliance cut out ( really savagely) my HID lights - and replaced with cheap arse standards! And from what I understand HID lights are rather expensive!

BTW - you may find that they might have to remove your front bar to ship your car to you!

Edited by ShadowKnyght
the side skirts and rear bar are the same as the base factory S2, its just the front bar is completely different and the rear bar has the dayz skirt.. bolt on to any standard rear bar

So is that true, that the S2 Dayz rear lower lip spoiler bit actually bolts on to the standard S2 rear bumper, even a S2 that wasn't optioned with the Dayz lip?

It's just that I was looking at a couple of photos and thought that it looked like the standard S2 bar had a different piece molded onto the bottom - pics follow:

s2_standard_bar.jpg

...notice the last sort of "crease" (as I'll call it) at the bottom, followed by a section which is kind of rounded underneath... sorry I'm not explaining very well... but on the Dayz version:

s2_dayz_bar.jpg

On the Dayz version it's definitely a two-piece affair... I am thinking of importing a lip spoiler but need to confirm that it will bolt up to the standard bar in the first picture.

Thanks...

daveb

DaveB - I think you will find that the lower lip overlaps the standard bumber along that crease line.

I agree, it appears to slot into the groove on the standard bar - fasteners on ends in the wheel arches?

Hi Mike,

I can probably supply the full bar for approx. $400 and the lip for $200 depending on quantity. If you wanted the full rear bar then I would need a factory rear bar to work off but of course the rear would then be around the $400 mark also.

thanks

so uys who is interested or is everyone all talk

Hi Mike,

I can probably supply the full bar for approx. $400 and the lip for $200 depending on quantity. If you wanted the full rear bar then I would need a factory rear bar to work off but of course the rear would then be around the $400 mark also.

thanks

so uys who is interested or is everyone all talk

mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm......bump

What car are the moulds being made from? Have you got a donor organised yet?

we have a donor car in syd but theese prices are from bribane.it would be good if someone up there could lend theirs or we can just do it from here in sydney.but is it worthwhile if nobody is interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...