Jump to content
SAU Community

Recommended Posts

  • Replies 95
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

2 turbo's wernt enough, didnt manage to get to the meet point in time. o wells hopefully ill catch the pm sooner next time.

ended up going for a lil spin up windy point no popo that way :worship:

just 1 tool in a commo pulling up near me in the friggen huge car park for the restaurant and lighting up the wheels. I was very impressed. :whistling:

I also heard there was cops picking cars on hindley st at random(meaning anything looking nice) and giving them a random breath test followed by a free check of the vehicle's modifications.

i got ushered over to the sidewalk on rundle, tried to pin me for rims, and coz i was driving with only driving lights on lol ._. got away free after showing him the tyre placard :whistling:

bloody cops and bloody pinging engine!!!!!!!!!! urghhh! cars!!!!!!!!!!!

oh and by the way i just about to leave to go get my little pinging problem sorted out (putting the timing back a little)

stupid cops. what were they thinking just leaving there car just around a blind corner on a 80km/h road. there asking to be hit.

hope your car is ok cara. i need to adjust my lights soon.

luke

Sorry guys, the wife got home from work early and ended up staying at home watching the bourne identity nad bourne supremacy. We had to watch these as the wife refused to see ultimatum untill she had seen the first two.

Sounds like i would have disappointed the flamin mongrelstuble's anyway with my stock standard gtr in their defect stations. They have been bad the last couple of weeks.

i took my car to southern hi tech dyno this morning and john has put the timing back, so that should stop the pinging. it was pinging on the way home too. john said that cause the weather is getting warmer thats what was probably causing the pinging

while i was down south rd way went to emtech and brought some white parker lights............f&%^%ers cant do nothing now.....even changed the interior light too................

ive learnt from my mistakes the other week

f**k heading out in the 32 on sat and sunday nights. im scared driving during the day too because of cops!

Edited by Import S13

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...