Jump to content
SAU Community

Recommended Posts

Guest Tempest

Now there is something i am somewhat unclear of...

I have asked twice already if you import a car from japan do all mods have to be removed and destroyed... Both times i have got the answer "correct"

Now.. could someone explain why it is that anyone would purchase a car "highly modified" if all the mods are to be taken off before they actually get it?

This may seem very noob of me but i intend to import soonish.. and i am getting some idea's of how it all works.

I downloaded the FAQ's from www.prestigemotorsport.com but it didn't answer the question fully...

Link to comment
https://www.sau.com.au/forums/topic/18421-car-details-before-purchase/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

It is dependant on how the car enters the country, so there should be nothing to stop you taking off the parts overseas and shipping them with the car .. as long as the car itself is 100% stock and any aftermarket parts are not fitted prior to registration.

it all seems to simple to remove the mods and get them shipped over seperately ... its going to cost $'s to:

a) remove the mods

B) source stock bits

c) install stock bits

d) send over original mods seperately

e) re-install mods when landed

i wonder by the end of it how much you've really saved...?

  • 2 months later...

Question:

When is a RAW NOT a RAW?

Answer:

When they leave on or re-fit after market(non-conforming parts) with-out evidence!!!

This is going to be a huge problem for "some" of the RAW workshops here in Aust particularly the ones importing Skylines,as to import and sell a stock33 will be about as saleable as a" pair of trousers filles with African killer bees" . and some Raws have allready gone out and publically said"If they think I am going to remove a S/Steel Trust exhaust of a vehicle and destroy it ,they must think I am a F%CK$# Idiot" un-quote!!!!

I wonder how long someone will be a RAW for with that kind of attitude?

What would happen to somebody who has paid a deposit to a RAW to import a modified Skyline, and the vehicle gets inspected and the RAW gets an audit and nailed? where would that leave the client and his vehicle???

Originally posted by regan

What would happen to somebody who has paid a deposit to a RAW to import a modified Skyline, and the vehicle gets inspected and the RAW gets an audit and  nailed? where would that leave the client and his vehicle???

Can someone PLz answer this question

A raw without a licence... workshop... and probably in Jail.... or fined heavily.

The customer..... without a car... and probably out of pocket a lot due to the car (probably) being destroyed or re exported.....

(Just guessing here)......

hehe..

anyway, i wouldn't be trying to get an importer to push the rules as they'll be regular inspections. The only people that are going to suffer from this are those trying to do the dodgy, or you when you're car gets taken back or destroyed. That is one of the whole reasons the new scheme was brought in the first place, to stop some of that from happening.

Originally posted by P1E

I am currently importing a vehicle through Geoff and he has assured me that this is untrue. :confused:

Yes, that is true - ALL aftermarket parts will have to be destroyed or re-exported with evidence provided to keep the RAWS out of hot water when they get checked out by the DOTARS.

At this stage it appears that this may even include stupid things like gear shift knobs and additional gauges .. nobody really knows how strict they will be with enforcing these laws so it will be a case of "better safe than sorry"

I would not personally suggest importing any car with modified parts unless you are prepared to lose them and wear the cost of buying stock parts to replace them .. trying to "sneak" anything through at this stage would be just plain stupid for you and beyond belief for the RAWS workshop.

Hi Pie,

If you are talking about a 15Y/O vehicle, a/m gear can be left installed as the only dramas you may encounter will be the local Licencing authorities. and it may just be a case of removing some of the parts to licence the vehicle.

Although if you have been "promised" a vehicle imported by a RAW(SEVS) vehicle with the non-conforming parts retained or re-fitted then be very very carefull. In fact if anybody from"DOTARS"is monitoring this thread then I would say you are allready shot! and possibly the company you have mentioned!!!!!

I would guess that if a RAW was caught out with your vehicle in his premisis that was signed -off and found NOT to be conforming to his evidence ie:17" Rims fitted or S/steel exhaust ect then you would be without your vehicle, and DOTARS would not care who owns it ,as it would come down to a legal claim between you and the RAW, not DOTARS.....

I'm looking to import a relatively stock Series II R33, although a couple I have looked at have had a few small extras (GT-R seats, rims, gauges, etc.).

I was originally under the impression that all aftermarket parts had to be destroyed, but Geoff explained that such rumours are completely unfounded.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...