Jump to content
SAU Community

Recommended Posts

Guest Tempest

Now there is something i am somewhat unclear of...

I have asked twice already if you import a car from japan do all mods have to be removed and destroyed... Both times i have got the answer "correct"

Now.. could someone explain why it is that anyone would purchase a car "highly modified" if all the mods are to be taken off before they actually get it?

This may seem very noob of me but i intend to import soonish.. and i am getting some idea's of how it all works.

I downloaded the FAQ's from www.prestigemotorsport.com but it didn't answer the question fully...

Link to comment
https://www.sau.com.au/forums/topic/18421-car-details-before-purchase/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

It is dependant on how the car enters the country, so there should be nothing to stop you taking off the parts overseas and shipping them with the car .. as long as the car itself is 100% stock and any aftermarket parts are not fitted prior to registration.

it all seems to simple to remove the mods and get them shipped over seperately ... its going to cost $'s to:

a) remove the mods

B) source stock bits

c) install stock bits

d) send over original mods seperately

e) re-install mods when landed

i wonder by the end of it how much you've really saved...?

  • 2 months later...

Question:

When is a RAW NOT a RAW?

Answer:

When they leave on or re-fit after market(non-conforming parts) with-out evidence!!!

This is going to be a huge problem for "some" of the RAW workshops here in Aust particularly the ones importing Skylines,as to import and sell a stock33 will be about as saleable as a" pair of trousers filles with African killer bees" . and some Raws have allready gone out and publically said"If they think I am going to remove a S/Steel Trust exhaust of a vehicle and destroy it ,they must think I am a F%CK$# Idiot" un-quote!!!!

I wonder how long someone will be a RAW for with that kind of attitude?

What would happen to somebody who has paid a deposit to a RAW to import a modified Skyline, and the vehicle gets inspected and the RAW gets an audit and nailed? where would that leave the client and his vehicle???

Originally posted by regan

What would happen to somebody who has paid a deposit to a RAW to import a modified Skyline, and the vehicle gets inspected and the RAW gets an audit and  nailed? where would that leave the client and his vehicle???

Can someone PLz answer this question

A raw without a licence... workshop... and probably in Jail.... or fined heavily.

The customer..... without a car... and probably out of pocket a lot due to the car (probably) being destroyed or re exported.....

(Just guessing here)......

hehe..

anyway, i wouldn't be trying to get an importer to push the rules as they'll be regular inspections. The only people that are going to suffer from this are those trying to do the dodgy, or you when you're car gets taken back or destroyed. That is one of the whole reasons the new scheme was brought in the first place, to stop some of that from happening.

Originally posted by P1E

I am currently importing a vehicle through Geoff and he has assured me that this is untrue. :confused:

Yes, that is true - ALL aftermarket parts will have to be destroyed or re-exported with evidence provided to keep the RAWS out of hot water when they get checked out by the DOTARS.

At this stage it appears that this may even include stupid things like gear shift knobs and additional gauges .. nobody really knows how strict they will be with enforcing these laws so it will be a case of "better safe than sorry"

I would not personally suggest importing any car with modified parts unless you are prepared to lose them and wear the cost of buying stock parts to replace them .. trying to "sneak" anything through at this stage would be just plain stupid for you and beyond belief for the RAWS workshop.

Hi Pie,

If you are talking about a 15Y/O vehicle, a/m gear can be left installed as the only dramas you may encounter will be the local Licencing authorities. and it may just be a case of removing some of the parts to licence the vehicle.

Although if you have been "promised" a vehicle imported by a RAW(SEVS) vehicle with the non-conforming parts retained or re-fitted then be very very carefull. In fact if anybody from"DOTARS"is monitoring this thread then I would say you are allready shot! and possibly the company you have mentioned!!!!!

I would guess that if a RAW was caught out with your vehicle in his premisis that was signed -off and found NOT to be conforming to his evidence ie:17" Rims fitted or S/steel exhaust ect then you would be without your vehicle, and DOTARS would not care who owns it ,as it would come down to a legal claim between you and the RAW, not DOTARS.....

I'm looking to import a relatively stock Series II R33, although a couple I have looked at have had a few small extras (GT-R seats, rims, gauges, etc.).

I was originally under the impression that all aftermarket parts had to be destroyed, but Geoff explained that such rumours are completely unfounded.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...