Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

I think you'll find the story is that any parts on the car when it is shipped to Aus need to be destroyed before the car can be complied.

There is nothing in the import rules stopping you from modifying a car after you get it in Aus. This might be with parts that used to be on the car in jp.

If you were working in an industry that has just had a very deliberate crack down would you be sticking your neck out?

I can tell you this if you are unsure, ask your BROKER who is complying your car then ask who the workshop is and what will they do with the aftermarket parts and you want the answer in writing.

Or just deal with J-SPEC as Craig asked these questions a long time ago and has always told the truth and will show you the answer in writing.

Look guys read this simple as that dont believe anything unless it is writing.

14. Disposal of Non-Complying Parts

The workshop must have procedures and records to confirm that all non-complying parts removed from vehicles are either re-exported or destroyed. While the tyres on the imported vehicle still have to be replaced with new tyres, the tyres removed from the vehicle do not need to be destroyed. However, records need to be kept to show where the removed tyres have gone.

http://raws.dotars.gov.au/raws_online_guide.htm

Hmm. I e-mailed this to Geoff - he responded with:

We have spoken with the compliance workshops about this specifically and they have advised that despite being written into the RAWS guide there has been no confirmation of this from DOTARS themselves.  The workshops that are already operating are not destroying the parts, rather removing and replacing them with complying items.  If you would like to speak to one of them to feel safer, let me know and I'll supply contact details.

The car sits at the workshop until they gain their RAWS and if they dont get it the car is re-exported or destroyyed.

I know of people holding cars since January waiting to finish their RAWS.

I would be hesitant to let some people use my car as a test vehicle it would have to be somebody you had a lot of trust in.

  • 2 weeks later...

How would someone prove or disprove that parts were destroyed. Is the method for part destruction outlined somewhere?

All the workshop would have to do is keep a log book of parts removed and destroyed, and they are in the clear.

They can say the parts were crushed for scrap metal when really the parts were just given back to the original owner with no receipt or record.

This whole parts fiasco seems very stupid and pointless to me anyway. If the car is road worthy with the aftermarket parts on then what is the problem?

Originally posted by J-Spec Imports

EXACTLY - it is not going to be a cheap process, even with cheap original parts in Japan .. you will need to have "friend" over there that can do all of the running around for you..

Might I be of assistance?:P

I would destroy the parts, take photos of the parts and keep on hand a reciept from the scrap metal yard.

Or just dont bring in the cars with all the modified parts to make life easy.

I can tell you this if or when I have a RAWS I wouldnt bring in the car for somebody who says throw away $50,000 and your only income so some snot nose kid can save a couple of grand on a unroadworthy car that dosent pass ADR's.

It is as plane and simple as that, so I dont know why people are still complaining on this forum, like it will make a diference in DOTRS eyes.

Why not help people through the new rules not complain about them.

Driver, a modified car cannot be imported and complied under the new scheme.

The complier needs to provide proof the parts were destroyed.

The owner of the car would be responsible for the cost of replacing the parts. If you have bought via a broker, *you* are the owner.

Modified cars *can* be bought in if they are:

1) Older than 15 years old

2) Are a personal import that you have owned for more than 12 months overseas

3) For race or rally use only.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...