Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

I think you'll find the story is that any parts on the car when it is shipped to Aus need to be destroyed before the car can be complied.

There is nothing in the import rules stopping you from modifying a car after you get it in Aus. This might be with parts that used to be on the car in jp.

If you were working in an industry that has just had a very deliberate crack down would you be sticking your neck out?

I can tell you this if you are unsure, ask your BROKER who is complying your car then ask who the workshop is and what will they do with the aftermarket parts and you want the answer in writing.

Or just deal with J-SPEC as Craig asked these questions a long time ago and has always told the truth and will show you the answer in writing.

Look guys read this simple as that dont believe anything unless it is writing.

14. Disposal of Non-Complying Parts

The workshop must have procedures and records to confirm that all non-complying parts removed from vehicles are either re-exported or destroyed. While the tyres on the imported vehicle still have to be replaced with new tyres, the tyres removed from the vehicle do not need to be destroyed. However, records need to be kept to show where the removed tyres have gone.

http://raws.dotars.gov.au/raws_online_guide.htm

Hmm. I e-mailed this to Geoff - he responded with:

We have spoken with the compliance workshops about this specifically and they have advised that despite being written into the RAWS guide there has been no confirmation of this from DOTARS themselves.  The workshops that are already operating are not destroying the parts, rather removing and replacing them with complying items.  If you would like to speak to one of them to feel safer, let me know and I'll supply contact details.

The car sits at the workshop until they gain their RAWS and if they dont get it the car is re-exported or destroyyed.

I know of people holding cars since January waiting to finish their RAWS.

I would be hesitant to let some people use my car as a test vehicle it would have to be somebody you had a lot of trust in.

  • 2 weeks later...

How would someone prove or disprove that parts were destroyed. Is the method for part destruction outlined somewhere?

All the workshop would have to do is keep a log book of parts removed and destroyed, and they are in the clear.

They can say the parts were crushed for scrap metal when really the parts were just given back to the original owner with no receipt or record.

This whole parts fiasco seems very stupid and pointless to me anyway. If the car is road worthy with the aftermarket parts on then what is the problem?

Originally posted by J-Spec Imports

EXACTLY - it is not going to be a cheap process, even with cheap original parts in Japan .. you will need to have "friend" over there that can do all of the running around for you..

Might I be of assistance?:P

I would destroy the parts, take photos of the parts and keep on hand a reciept from the scrap metal yard.

Or just dont bring in the cars with all the modified parts to make life easy.

I can tell you this if or when I have a RAWS I wouldnt bring in the car for somebody who says throw away $50,000 and your only income so some snot nose kid can save a couple of grand on a unroadworthy car that dosent pass ADR's.

It is as plane and simple as that, so I dont know why people are still complaining on this forum, like it will make a diference in DOTRS eyes.

Why not help people through the new rules not complain about them.

Driver, a modified car cannot be imported and complied under the new scheme.

The complier needs to provide proof the parts were destroyed.

The owner of the car would be responsible for the cost of replacing the parts. If you have bought via a broker, *you* are the owner.

Modified cars *can* be bought in if they are:

1) Older than 15 years old

2) Are a personal import that you have owned for more than 12 months overseas

3) For race or rally use only.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...