Jump to content
SAU Community

Recommended Posts

ok i just got an upgraded fuel rail for my rb26dett but the problem is the holes on the rail were the injector sits in are too big! do i have to get new injectors that fit? i thought all top feeds are the same diameter(well ones for the rb26 atleast) is there away i can make them work? im so lost! help

Link to comment
https://www.sau.com.au/forums/topic/184734-upgraded-fuel-rail/
Share on other sites

Why did you buy a fuel rail?

The stock one if fine for over 400rwkw, and going by all your others threads your trying to do things all as cheap as possible... so this parts makes less sense than some of the others!

this may seem like an obvious question but what size and brand fuel rail did you buy? and what injectors are you trying to put in there?

standard RB26 injectors are 10.5mm.

i really dont know what kind of fuel rail! sorry its just like a generic type! its got 6-an fittings on both side and middle! im using stock rb26dett injectors but they are loose as hell in the hole in the rail! can i just use a bigger o-ring to make it fit? ill try to find it ill post a pic/link

unfortunately that is the problem you get with cheaper generic brand stuff. often they have poor fit and finish and are just generally not always 100% suitable. as for larger 0-rings you may be able to. try some and see if you can get some with the right ID and OD to make it work. but personally I'd just bin the rail and either buy a proper fitting one, or just use the stockie.

r31-thanks for the nice comments! no need for that! its my car/motor and ill do what i want!

So you either are or are not short of a coin.

Either way the ebay add says 2JZ... i mean, that isnt RB26 now is it?

Sell it, use the stock one.

So you either are or are not short of a coin.

Either way the ebay add says 2JZ... i mean, that isnt RB26 now is it?

Sell it, use the stock one.

It rude to question someone as to if they're low on cash, its none of your concern. You posted in most of his threads just questioning his intentions instead of providing any help at all.

He said the its the same rail but for a rb26, maybe the supplier simply sent out the wrong part.

No need to post useless comments that people dont want to read, learn to be constructive.

In his threads he has been stating he is trying to go all the cheap options.

Buying a un-proven fuel rail does not fit into this and is risky, and as it turns out... look what happened.

Might pay you to go back over past threads, as it seems you missed the majority.

In his threads he has been stating he is trying to go all the cheap options.

Buying a un-proven fuel rail does not fit into this and is risky, and as it turns out... look what happened.

Might pay you to go back over past threads, as it seems you missed the majority.

dude, your missing the point...

your not helping anyone. anyway its not the first time someone has mentioned something about your attitude in people's thread, you didnt get the point then and you wont get it now.

let the thread continue.

dude, your missing the point...

your not helping anyone. anyway its not the first time someone has mentioned something about your attitude in people's thread, you didnt get the point then and you wont get it now.

let the thread continue.

Might help the poor guy develop some common sense.

ok the link i posted i was the fuel rail looks like!!! i didnt order that one/ or order it from the seller! it came from a company called bmpc here in america! it came in a box marked for an r32/33/34 so yes its for an rb26dett! i just want to know it there away to make stock injectors work! no need to bash my shallow pockets! i got the part of dirt cheap! just looking for help not bashing!

and another note r31 i will beusing a greddy emanage to run my car so is that good enough for your standards? or am i still to cheap?

If you got it for "Dirt cheap" then no real loss, just sell it on. Just use the stock rail (you wont like the cost of AN fittings to get it running anyway)

I would recommend really researching parts you need to make the power you want. The RB26 Dyno Thread is more then a page of braggin rights. You can browse many setups and get an very good idea of what parts people are using to make what power.

The search box will save you $$$ and ridicule.

Happy tuning :closedeyes:

if u do use the billet rail, u'll find u will end up spending 3x the cost of the rail itself, on braided lines & fittings

also if u do use the billet rail, u'll now need an aftermarket fuel reg.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...