Jump to content
SAU Community

Recommended Posts

k so now ive got my fancy 1.5 mechanical and am in the process of wearing it in what oil should i use and where do i get it

for those who want the low down its a kaaz 1.5 in a r33 gtst with the kaaz oil in it for wear in but do i stick with kaaz oil (local seller?) or change to another brand

Link to comment
https://www.sau.com.au/forums/topic/184778-diff-oil/
Share on other sites

k so now ive got my fancy 1.5 mechanical and am in the process of wearing it in what oil should i use and where do i get it

for those who want the low down its a kaaz 1.5 in a r33 gtst with the kaaz oil in it for wear in but do i stick with kaaz oil (local seller?) or change to another brand

kaaz oil is good, you should have enough oil to do the run in and then refill it. i forget what the place is called (but i find out for you) that stock kaaz oil price is very $$$$ thou.

You can also try castrol LSX90 as my friend uses that in his kaaz 2way lsd and its very good.

Also stay away from REDLINE oil as its not good for the diff and turns it in to a noise thing if you uses it and it also damages the plates

edit: Place that stock Kaaz Oil is Vision R price is about $150 (1L)

Link to comment
https://www.sau.com.au/forums/topic/184778-diff-oil/#findComment-3344717
Share on other sites

ahh kewl no redline got it

aparently the r33 takes 1.5 litres of oil so i need another can for once the diffs worn in and would rather not have to keep ordering in from the eastern states the damn stuffs expensive enuf without payin freight as well

Link to comment
https://www.sau.com.au/forums/topic/184778-diff-oil/#findComment-3344726
Share on other sites

ahh kewl no redline got it

aparently the r33 takes 1.5 litres of oil so i need another can for once the diffs worn in and would rather not have to keep ordering in from the eastern states the damn stuffs expensive enuf without payin freight as well

give LSX90 try as its a limited slip oil (whatever that means), my mate who runs it in his kaaz lsd told me this

oils are very important as the clutch plates are designed to run wit certain oils, when i tried LSX90 it felt pretty much same wit kaaz oil

he is a mech so he knows what he is talking about lol

Link to comment
https://www.sau.com.au/forums/topic/184778-diff-oil/#findComment-3344736
Share on other sites

edit: Place that stock Kaaz Oil is Vision R price is about $150 (1L)

wow super expensive rms motorsports (sau sponsor) sells the stuff for $95 a can ( 2l) mabe i shuuld just get afew cans from them and store em diff oil doesnt go off does it?

Link to comment
https://www.sau.com.au/forums/topic/184778-diff-oil/#findComment-3344748
Share on other sites

wow super expensive rms motorsports (sau sponsor) sells the stuff for $95 a can ( 2l) mabe i shuuld just get afew cans from them and store em diff oil doesnt go off does it?

ahaha, i dont think so. I think Kaaz advises to change the diff oil every 5000km can become very $$$ lol

Link to comment
https://www.sau.com.au/forums/topic/184778-diff-oil/#findComment-3344780
Share on other sites

The Redline oil is very thick, I got some for my car and trying to pump it into the diff was a mission. I would go for Redline, check out their website and they will give you a recommendation on what you should use.

have alook hear, more than one person says the same thing about running redline oil in your mech diff (its not good)

http://www.skylinesaustralia.com/forums/in...950&hl=kaaz

Link to comment
https://www.sau.com.au/forums/topic/184778-diff-oil/#findComment-3346524
Share on other sites

thanks for the info guys and for the link to very helpfull should be wearing it in this weekend so will make a decision on oil and let all know how it turns out

cool, im looking at buying a mech lsd soon but not sure weather to go 1.5 or 2way, what made you go down the 1.5way ?

Link to comment
https://www.sau.com.au/forums/topic/184778-diff-oil/#findComment-3347210
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...